Exhibitor products

The AD-SW 3 GL is used to measure high AC currents, such as secondary currents from large current transformers (e.g. 0...5A AC). The device contains 3 measuring transformers for contactless measurement of all three phase currents. The lines to be measured are fed horizontally through the device. Three small signal outputs are available for evaluation, which represent the measured current. The three output signals are galvanically coupled but separated from the input and the supply with high isolation. The AC sine wave voltage outputs, which follow the input signal 1:1 up to the maximum bandwidth of the device, can be customized. The integrated wide range power supply allows a wide supply voltage range with low self-heating.

The isolation amplifier AD-TV 420 GVD serves the galvanic separation of analogue signals and of transmitter signals. When a 2-wire transmitter is connected, this will be supplied directly via a galvanically separated and current-limited supply voltage. All measuring ranges and outputs can be freely parameterized. This can be carried out via the optional operating panel AD-VarioControl or via the programming software AD-Studio. The wide bipolar input measuring range makes this buffer amplifier into the universal type for almost all applications in the area of standard signals and beyond. All supply ranges are covered with the wide range power pack. Application Amplification, transformation and electrical isolation of current or voltage signals Specific characteristics - bipolar current input (+/- 0,5 mA bis +/- 50 mA) - bipolar voltage input (+/- 1 V bis +/- 100 V) - Power supply for 2- / 3-wire transmitters - 2 bipolar current or voltage output - Operating module as an accessory - 23 mm narrow housing with detachable terminal clamp

The digital multi-function measuring transformers of series VarioCheck AD-VC 1 are freely programmable digital measuring transducers with two analogue outputs and up to 2 limiting value relays. Extensive standard equipment and additional options solve almost all imaginable tasks of a modern evaluation. All measuring ranges and outputs can be freely parameterized. This can be carried out via the optional operating modul AD-VarioControl or via the programming software AD-Studio. VarioCheck AD-VC 1 fulfils all tasks of a universal and secure measuring value recording through integral function modules such as limiting value messages, freely adjustable hysteresis, selectable relay functions, time-delayed switching, automatic or manual simulation modus, free linearizing curves and a wide range of supply voltage.

The AD-VL 500 FE monitor module is a display unit and data logger for front panel installation. It has up to 8 analogue standard signal inputs. The inputs can be configured as current or voltage inputs. Counter values can be derived simultaneously from the analogue signals by means of adjustable switching thresholds. A scaled measured value display with freely definable units is possible. The display is done by freely configurable display elements such as numeric display, bar graph, time diagram, drag pointer, LEDs, etc. The unit is supplied with predefined standard display windows. All signals can be logged cyclically in the unit's own memory. The logged data are stored as daily files on an internal micro SD card. They can be retrieved at any time with a USB stick or downloaded via the network interface. The unit can be configured either via the integrated web server of the network interface or via the configuration software AD-Studio. The configuration software is available free of charge on the ADAMCZEWSKI website. The various interfaces (RS485/LAN) make it easy to integrate the device into your own data networks in order to read out measurement data in real time.

The HUB-RT100 and HUB-MRT100 add-on modules ensure that the SIINEOS operating system clock continues to run even in the event of a power failure. This means that the system time can be continuously retrieved. This is particularly important in locations with frequent power cuts. When using the HUB-MRT100, the most recently written process data is also stored and replayed. APPLICATION: _Continuous updating of the time even when the units are without power supply HUB-MTR100 only: contains additional memory for process data Add-on modules can be easily retrofitted to the HUB-GM series IoT gateways.

Remote I/O Boxes • IO-Link Master type (ADIO-ILM), IO-Link HUB type (ADIO-HUB) • Convenient Wiring with Daisy Chain Structure • Zinc Die-cast Housing and IP67, IP69K Protection Rating • Push-Pull Connector Type Available • I/O port setting and status monitoring (cable short / disconnection, connection status, etc.)

The ERO adjustment slides of the VS series are dovetail slides made of aluminum with maximum strokes (in the standard version) of 5 - 75 mm (depending on the size), which are manufactured in one, two or three-axis versions. The adjustment slides are available in 4 different types Their characteristics are the extensive opportunities of combinations and add-on options fore example 6 different clamping opportunities. A lasered scale on the side or a mechanical position display are standard options. If you like, you can get a customized adjustment slide for example with customized length.

• Simulate, Measure, and Source Electrical • Built-in barometer • Intrinsically safe models available (Ex) • Large, user-friendly touchscreen • USB Type-C and Bluetooth communication • IP67 protection rating • High voltage measurement capability (300V AC) • True RMS voltage measurement capability • Dual-channel pressure module connections • High static differential pressure measurement 0.002% of F.S. Additel's new multifunction process calibrator series combines portability, functionality, and accuracy with an intuitive and easy-to-use color touchscreen display. The ADT226 is a powerful yet cost-effective process calibrator, also available with an ATEX-certified intrinsically safe option – the ADT226Ex. This allows calibration work to be performed in the most hostile environments. These new devices will not only meet your calibration needs but also make metrology easier for you!

• Simulate, measure, and transmit pressure, temperature, and electrical signals • Documentable process calibrator (data logger) • Built-in full HART communication (ADT227-HART) for 227Ex Basic HART communication • Built-in barometer • Intrinsically safe models available (Ex) • Large, user-friendly, smartphone-like touchscreen • USB Type-C, Bluetooth communication • IP67 protection class • High voltage measurement capability (300V AC) • RMS voltage measurement capability • Dual-channel pressure module connections • High static differential pressure measurement 0.002% of reading Additel's new series of multifunction process calibrators combines portability, functionality, and accuracy with an intuitive and easy-to-use color touchscreen display. The ADT227 is a powerful yet cost-effective process calibrator that features an ATEX-certified intrinsically safe option – the ADT227Ex – that allows calibration work to be performed in the most hostile environments. These new devices will not only meet your calibration needs but also simplify your metrology!

• Automated and self-contained pressure generation and control to 1,500 psi ( 100 bar) • Precision accuracy models to 0.01%FS • Two removable internal pressure modules for multi-range selection • Control stability to 0.003%FS • Portable, designed for use in the field and in the lab • Ability to measure two external pressure modules • Wi-Fi, LAN, Bluetooth, USB and Ethernet communication • Full HART field communicator • HART and profibus communication • Data logging and task management • Patented electric pump technology and improved speed At Additel, innovation and continuous improvement are part of our company's culture and the products we introduce. When we set out to deliver the Additel 761A series calibrators, we knew we needed to provide breakthrough improvements and additional value to the existing line of calibrators (Additel 761 series). The ADT761A has many improvements: increased pressure range to 1,500 psi (100 bar), removable internal pressure modules as low as 0.01%FS, increased speed to pressure, ability to read two external pressure modules, touch screen display, Wi-Fi, Bluetooth, and Ethernet communications, double the original battery life, and more! Just like the first generation, this second generation product is completely self-contained and automated with a built-in pump for pressure generation and precision control technology. Simply set the desired pressure and watch the calibrator do the work.

• Automated pressure generation and control up to 1,035 bar (15,000 psi) • Accuracy to 0.01% of full scale • Manual or automatic dual-range selection • Control stability ≤ 0.005% of full scale • Portable, designed for field and laboratory use • Control via optional external pressure modules • Supports two external pressure modules • Communication via Wi-Fi, LAN, Bluetooth, USB, and Ethernet • Full-featured HART communicator for field use • HART and PROFIBUS communication • Data storage and task documentation • Patented electric pump technology The Additel 762 automated pressure calibrator is unlike any other pressure calibrator on the market. It is a complete, turnkey solution for automating pressure calibration work up to 1,035 bar (15,000 psi). This state-of-the-art product, designed for both field and laboratory use, is quickly becoming the preferred calibrator for laboratory and field technicians due to its portability and accuracy. It meets our customers' needs by providing fully automated support for the calibration of pressure transmitters, switches, manometers, digital meters, and sensors, including HART/PROFIBUS devices, combined with fully integrated task functionality, data acquisition, and Wi-Fi connectivity.

• Automated pressure generation and control up to 1,035 bar (15,000 psi) • Accuracy to 0.01% of full scale • Manual or automatic dual range selection • Designed for use with water • Automated fluid management • Control stability ≤ 0.005% of full scale • Designed for field and laboratory use • Control via optional external pressure modules • Supports two external pressure modules • Communication via Wi-Fi, LAN, Bluetooth, USB, and Ethernet • Full-featured HART communicator for field use • HART and PROFIBUS communication • Data storage and task documentation • Patented electric pump technology The Additel 762W automated pressure calibrator is unlike any other pressure calibrator on the market. It is a complete, turnkey solution for automating pressure calibrations up to 1,035 bar (15,000 psi) using deionized water as the working fluid. This state-of-the-art product, designed for both field and laboratory use, is quickly becoming the calibrator of choice for laboratory and field technicians due to its portability and accuracy. It meets our customers' needs by fully automating the calibration of pressure transmitters, switches, pressure gauges, digital instruments, and sensors, including HART/PROFIBUS devices, combined with fully integrated task functionality, data acquisition, and Wi-Fi connectivity.

• Pressure ranges from -0.99 bar (-14.35 psi) to 420 bar (6000 psi) • Two removable internal pressure modules with multi-range selection • 0.02% of full scale, 0.01% of full scale, and 0.01% of measured value accuracy • Control stability of 0.003% of full scale E. • Ultra-high-speed pressure control • Absolute and gauge pressure • LAN, USB, RS232, and Ethernet communication • Large 7" color touchscreen display • Optional barometric pressure module • Easy-to-use icon-driven interface • Emulation mode These modular pressure controllers combine state-of-the-art control and measurement technology, modular design, and user-friendly features. The Additel 783 controller series is optimized for speed without compromising on accuracy and stability. For users requiring automated production, testing, and calibration, Additel offers the right solution with these pressure controllers. The ADT783 can be quickly equipped with two control modules and a barometric reference module to cover a wide pressure range. The Additel 783 series offers three base units to choose from, ranging from 420 bar (6000 psi) to low differential pressures.