Exhibitor products

BOXEXPERT presents the Michel series, plastic housings made of ABS for mechanical engineering, which offer maximum flexibility thanks to a modular height concept. The waterproof housing with TPE seal achieves IP66/67 protection, ensuring complete protection for electrical installations in demanding environments, both indoors and outdoors. The robust and halogen-free plastic is weather-resistant, UV-resistant and resistant to extreme temperatures (-40°C to +80°C). With an impact resistance of IK08, the housing can withstand extreme environmental conditions such as hail, frost or extreme heat. The modular height concept of the Michel series allows different cover heights for the same footprint, ideal for installations beyond the standard. This offers a flexible solution without having to switch to a larger housing. The housing series offers metric knockouts on the sides of the lower housing part or smooth housing walls for individual assembly of cable glands. The pre-stamped holes can be opened without special tools, while smooth housing walls enable a high-quality look and individual positioning of the cable entries. The accessories include mounting screws for easy installation of DIN rails or mounting plates without having to work on the bottom of the housing. Mounting plates, DIN rails (TS15 or TS35), wall mounting tabs and hinges are also available.

BOXEXPERT presents the St. Pauli series, wall housings made of robust plastic, either made of polycarbonate or ABS. The series was developed for quick and easy installations, inspired by the lively St. Pauli district. The low weight makes the housing particularly easy to handle and saves time and money during assembly. Despite its lightness, the housing meets all quality standards and is technically suitable for indoor and outdoor use. With a high impact strength of IK07, UV resistance and weather resistance, it is durable and reliable even in extreme temperatures (-40°C to +60°C) and harsh environmental conditions. The halogen-free plastic ensures that the electronics and housing are protected from frost, extreme heat, hail or heavy rain. The protection class IP65 in accordance with DIN EN 60529/DIN 40050 is achieved by a seal made of low-wear polyurethane between the housing cover and the bottom, which ensures effective sealing of the housing joints from the outside. The St. Pauli series offers metric knockouts in the lower part of the housing for easy cable entry without additional tools. Various domes in the housing enable mounting plates or DIN rails to be attached. The housing cover extends over the entire dimension of the housing and offers enough area for printing, such as a company logo. The captive plastic screws in the outer corners of the lid are reusable and ensure secure attachment. The transparent housing cover offers the possibility of reading indicator lights or status displays.

The WH58MR rotary encoder is a magnetic safety rotary encoder with redundant position detection and hollowshaft, which has been specially developed for use in mobile machines. It can be used insafety-critical applications – up to performance level PLd. Thanks to its particularly robust design, an optionally redundant CANopen or CANopen Safety interface, it is ideally suited for tough conditions in mobile machines. • absolute redundant safety encoders • CANopen Safety or CANopen redundant interface • Can be used in applications up to performance level PLd • Hollow shaft to ø 15 mm • Salt spray tested housing available • High EMC compatibility • IP67 protection class • with PURE.MOBILE technology

The smallest safety multi-turn encoder for mobile machines! Specially developed for use in mobile machines, the absolute safety encoder WV3600MR delivers reliable and precise measurements even under the toughest environmental conditions. Thanks to the innovative safety concept, certified according to SIL2, the WV3600MR can also be used in safety-critical applications up to performance level d. Available as a single and multi-turn version and with an outer diameter of just 36mm, it can also be installed in applications with extremely limited installation space. WV3600MR profile: • smallest multi-turn safety encoder for mobile machines • Single or multi-turn version available • SIL2 (IEC 61508) PLd (DIN EN ISO 13849) certified (in preparation) • E1 approval by the Federal Motor Transport Authority (in preparation) • Protection class up to IP6K9K • with PURE.MOBILE technology

The WV58MR rotary encoder is a magnetic Safety rotary encoder with redundant position detection, custom-designed for use in mobile machines. It can be employed in safety-critical applications up to Performance Level PLd. Thanks to its particularly robust design of an optional redundant CANopen or CANopen Safety interface it is ideally suited for heavy-duty use in mobile machines. Combined with wire-actuated encoders, the WV58MR can als be used for reliable linear position monitoring. • absolute redundant safety encoders • CANopen Safety or CANopen redundant interface • Can be used in applications up to performance level PLd • Salt spray tested housing available • High EMC compatibility • available with special slewing ring functionality • with PURE.MOBILE technology

Absolute encoder from TR-Electronic with freely configurable analog interface Even in the age of Industrial Ethernet, IO-Link and Industry 4.0, analog signal transmission is still widespread and is used in new systems. It is a very cheap alternative on the control side if the desired resolution is suitable for analog transmission. Even the simplest controllers have analog interfaces that can be used for simple position or speed feedback. And - implemented as a current interface - larger transmission lengths can also be implemented easily. The analog interface from TR-Electronic in the latest encoder series is a true all-rounder. The multiturn position signal can be used as the basic variable for the 16-bit D / A converter. The speed signal can be used as well. When the position value is selected, the start and end point of the converted range can be freely set within the entire multiturn measuring range. You can also configure whether the analog signal is output as voltage (0..10V, -10..10V) or current (0..20mA, 4..20mA). As a current interface with "live zero", the analog interface provides a very effective method of implementing secure transmission. Live zero interface reliably monitors both the function of the encoder and wire break quite simple without protocols and software and on just two wires. Thanks to the modular concept of the latest generation of encoders from TR-Electronic, the analog interface is available for all detection systems. Magnetic detection offers sufficient resolution even for positioning over several revolutions, high-resolution, optical detections provide enough position resolutions to control the analog signal even with the smallest movement ranges. All mechanical variants are available with the new analog interface: size 58 with solid shaft, blind hole and hollow shaft up to 15 mm, in size 80 with continuous hollow shaft up to 27 mm, in size 110 with continuous hollow shaft up to 50 mm.

With the AC drives of the FDD 3000 series you can optimize your production process. Economical asynchronous motors can be precisely controlled with the low voltage AC drives. Thus, your motion application becomes more efficient and you save energy at the same time. The compact devices are available in 7 sizes. The 1- or 3-phase AC drives cover a power range from 0.37 to 90 kW. With an overload capacity of up to 180 %, the FDD 3000s are ideally suited for applications with short-term high torque requirements.

AC asynchronous motors can be found in many different applications - be it in industry, transport or even in private households. Single- or three-phased, designed in different sizes, AC synchronous motors are characterized by their simple and robust build. As long-term runners, they require very little maintenance, are long-lasting and cost-effective . Advantages of our AC motors: • Robust, low-maintenance design • Very cost-effective • Long lifetime • Easy control • Low noise • Compact design and different rotation directions • Can be combined with a variety of gearboxes as well as with speedometer and brakes

A secure, uninterrupted, and constant power supply is essential for every company. Whether fluctuations in decentralized power networks, reduction of peak loads, reliable supply of critical technologies in industrial plants, data networks, and telecommunications or the operation of renewable energies: Uninterruptible power supplies fulfill a demanding task. Especially for applications that require alternating current, the use of AC UPS systems is recommended.

AC/DC DIN Rail Power Supplies and Accessories The RACPRO1 series of industrial DIN rail AC/DC power supplies is compact, efficient, and includes single-phase input versions rated up to 480W and three-phase versions rated up to 960W. Additionally, the REDIIN series offers single-phase universal AC inputs and outputs rated up to 480W for cost-sensitive applications, without compromising performance in demanding industrial environments. The new REFIN series is super-slim and offered in the ‘step-shape’ format with up to 90W continuous rating. To complement these products, four-channel resettable e-Fuses are available in the DIN rail format rated up to 10A, as well as redundancy diode modules.

No matter how quickly and unpredictably the general conditions for industry change. Discover how you can automate and integrate more efficiently and conveniently than ever before. We are there for you at our stand and look forward to exchanging ideas with you!

Accelerate workpiece carrier after a stop Acceleration modules accelerate the workpiece carrier to the conveyor speed immediately after a stop process. The cycle time is reduced enormously by shortening the time between the machining cycles. The workpiece to be processed leaves the processing station faster and the next processing cycle can start earlier. Most efficient in combination with ASUTEC damping modules: after the soft stop, the acceleration module starts in precise coordination while the workpiece carrier is still being released. Available in pneumatic and electric versions.

We also have the appropriate accessories such as sealing rings, locknuts, adapters, reducers, extensions around our cable protection systems and much more in our program.

Smooth running: Full performance with the right accessories and perfectly matched components. Efficient work requires more than just a sensor. Almost as important are the appropriate accessories, which allow the sensor to utilize its full functionality. No matter if you need easy mounting, uncomplicated connection or reliable signaling, you can easily find the right accessories for your application in our extensive product range.