Exhibitor products

Even though we are the specialist in stopping, we never stop – since our invention of the proven stopper in 1990 and the beginning of our success story, we have been constantly developing it further. The Stop Module – or also known as the separator – is characterized by its diversity: whether Stop Modules with damping or without damping, pneumatic or electric, our Stop Modules stop the workpiece with the highest precision for a wide variety of loads, speeds and conveying media. In a damped version, one or more workpiece carriers are stopped particularly gently and without vibration. The workpiece carrier is released for further transport by lowering the stop. Our variants are particularly in demand in the high-speed range and for roller conveyor systems that have a particularly slim design. Find separate product categories for these popular variants below. And as always with Asutec: All products are available in pneumatic and electrical versions.

Stop Module for roller conveyor system with a special design for roller conveyor systems. Through the particularly narrow design specially developed by ASUTEC, the stoppers for roller conveyor systems fit perfectly into the confined installation space between the rollers. The new concept developed by ASUTEC with extreme stability and high resistance to soiling of the stoppers, high conveying speeds and dynamic acceleration after the stopping process enable short cycle times. Available in pneumatic and electric versions.

Stop Module High-Speed especially for very high speeds and high workpiece loads. The decision is up to the user: higher masses can be transported at the same speed or higher speeds can be achieved with the same mass. The optimized damping system of the ASMHS* series therefore more than meets the requirements of fast, flexible production. Damping modules are used to dampen the impact of incoming workpiece carriers without vibration right up to the end position. They guarantee optimum position stability of the workpieces. The stop remains in the end position without counterforce, resulting in very precise positioning without additional indexing. The pneumatic damping can be infinitely adjusted to the workpiece pallet weight. Fastening options for proximity switches are available for inductive monitoring of whether a workpiece pallet is in contact with the stopper or has passed it. Available in pneumatic and electric versions.

Stop Modules with damping for fast, precise and gentle positioning of the workpiece carriers. Asutec Stop Modules cushion incoming workpiece carriers vibration-free up to the end position. They guarantee optimum position stability for the workpieces. The stop remains in the end position without counterforce. This means that workpiece carriers can be positioned very precisely without additional indexing. The pneumatic damping can be infinitely adjusted to the workpiece pallet weight.

We offer the right product for every stopping point in a wide variety of assembly lines and transfer systems! Undamped and damped separating stops/stoppers are part of our program as well as corner dampers, index cylinders and backstops - both pneumatically and electrically driven. In addition to the proven basic products, we offer you individual special solutions. Contact us if your project has special requirements and needs a special solution! An extensive range of accessories is also available for our products.

IThe Storage and Feeder Hopper Conveyors from Robotunits are the modular solution for the precise feeding of bulk materials and dimensionally stable parts. Based on our C4N belt conveyor, flexibly adaptable in height, width and incline - for fast and economical integration into your processes.

Strain wave gears are characterized by absolute zero backlash, excellent repeat accuracy and a high torque capacity - all with small dimensions and low weight. We can also design all strain wave gears individually and tailor the performance, geometry, material, interfaces and gearbox properties precisely to your application, including function, component and system integration if required. This means that you do not have to compromise on the design of your machine or robot. Our motto: It is not the application that has to be adapted to the gearbox, but the gearbox to the requirements.

Strasor - The Power Station for Highly Efficient Laser Engraving Simple to use, high-end in quality and economical throughout its entire service life: the stationary Strasor fiber laser delivers the highest marking quality and reliability on an infinite number of conceivable surfaces in every version. Even in its basic configuration, the compact device from Mobil-Mark is ideal for many common marking tasks. But the Strasor is also flexible: with the accessories offered by Mobil-Mark, the laser can be transformed into a semi-automated power station that fits perfectly into production chains. High cycle times, long service lives and low maintenance requirements speak in favor of the Strasor. To ensure that the stationary engraving laser also realizes its full potential in your production, Mobil-Mark, as a special machine builder, offers customized special solutions in addition to the standard accessories. For smooth marking - if you want, even on the production line.

The Strip Series B240 is a programmable strip machine for the stepped processing of coaxial cables as well as the processing of multiconductor and single-conductor cables. Equipped with two rotary blades, it processes simple stranded wires and multiconductor cables with a cross section from 0.013 to 13 mm² (36 to 6 A WG) and a diameter of up to 9 mm (0.35”), thus achieving a strip length of 80 mm (3.15”) and a pull-off length of 40 mm (1.57”). Even challenging materials such as PUR, PVC, rubber, Teflon®, Tefzel® or textile glass braiding can be stripped cleanly and reliably thanks to the cutter head’s high-resolution movement axes. The B240 also processes micro-coaxial cables with a diameter of up to 0.8 mm (0.0314”) without the need for changeovers.

In its price class, the portable Strip Series B300 stripping machine opens up completely new possibilities for fast and at the same time reliable stripping of cables with cross sections from 0.03 to 8 mm2 (32 to 8 AWG).

The Strip Series B340 stripping machine boasts a wide range of performance. Equipped with four rotary X-shaped blades, it processes simple stranded wires and multiconductor cables with a cross section from 0.013 to 16 mm² (36 – 5 AWG) and a diameter of up to 9 mm (0.35”), thus achieving a strip length of 80 mm (3.15”) and a pull-off length of 40 mm (1.57”).

More than half the volume for the same performance. With the same physical size, the nanocrystalline core can achieve a significantly higher permeability than a ferrite core.

Ströme müssen auch in großen Anwendungen genau und sicher gemessen werden können. Dafür bietet der Hersteller RESI entsprechende Systemlösungen an. Basierend auf aktueller Shunt-Technologie werden Sensoren angeboten die über diverse Kommunikationsmöglichkeiten verfügen. Die Stromsensoren CB350/CB600/CB1000 sind Strommessmodule, die nicht nur für die Automobilindustrie geeignet sind und zur Messung von bidirektionalem Gleichstrom eingesetzt werden können. Sie zeichnen sich durch hohe Genauigkeit, geringen Stromverbrauch, einem weiten Betriebstemperaturbereich, hervorragende Reaktionsgeschwindigkeit, Temperaturstabilität und Störfestigkeit aus.

Whether it involves factory, machinery or facility cabling, Variant 1, Variant 4, Variant 5 and Variant 14 industrial connectors from the STX platform together with Variant 6 connectors from Telegärtner offer you first class, standards-compliant Industrial Ethernet solutions. One reason for this is their resistance to the stresses encountered in industrial environments. A second reason is their modularity: there‘s nothing like STX where you can equip protective housings with such an unlimited variety of plug or bulkhead inserts. Field assembly in industrial sites frequently involves difficult to reach locations and additional stresses resulting from dirt. Complicated components which must be assembled on site not only make the installer’s task more difficult but also contain the hidden potential for wrong connection or incorrect assembly. Telegärtner has taken up this challenge and, with STX, has developed a reliable Ethernet solution whose installation and assembly is simpler, more secure and, above all, requires no special tools. The performance advantages of STX connectors: • Transfer rates of up to 40 Gbit guaranteed • Easy to use with IP67 housing • Reliably protects copper and fibre optic cables against water and dirt • Seals with minimal abrasion, optimal handling and maximum form stability and impermeability • Resistant to dust, moisture, chemicals as well as mechanical and electromagnetic loads