Exhibitor products

The V-Cell is a compact automation module. The robot unit can be used for various purposes. For example, welding, handling and machine placement are among the most common applications. The V-Cell 100 is offered in the compact design as a standard module. This is characterized by space-saving design and easy transport possibilities with forklift or pallet truck. Due to the high flexibility of our equipment and staff, we can adapt the standard module to almost any customer requirement. So do not hesitate to contact us.

Safe sensorless standstill monitoring The safe sensorless standstill monitor UG 6946 from the SAFEMASTER S series detects the standstill of 3-phase and 1-phase motors independent of the direction of rotation. This means sensors such as encoders or proximity switches are not required. Access to the danger zone of a system is only possible by the enabling signal of the standstill monitor after the drive has been switched off and run down. In order to detect a standstill, the remanence voltage induced by the motor windings is evaluated and provides safe standstill monitoring up to Cat. 4 / PL e or SIL 3, even if the motor has already been switched off. Using a conventional release via a time control, dangerous movement could not necessarily be excluded. For the implementation of different operating modes, the standstill monitor UG 6946 also offers the possibility of bridging the standstill monitoring (muting). The simple integration into the machine and drive concept reduces the commissioning effort and costs and is particularly suitable for use in machine tools and woodworking machines, centrifuges and rolling drives. With a width of only 22.5 mm, the UG 6946 can be accommodated in the control panel even under tight space conditions allowing easy retrofitting. The device also offers two redundant safety contact paths and a forcibly guided signal contact.

The STL-x-60R-RGBW series status lights are universal tube lights made of impact-resistant and shatterproof polycarbonate. The high degree of diffusion offers very good glare control and generates a homogeneous light area. The status lights can be rotated almost 350° wich makes it easier to align with objects. The status lights are operated with a supply voltage of 24 V DC. The connection to the supply voltage is implemented via a 4-pin M12 sensor connector. This allows eight status states to be encoded (with the OFF state).

Unique solution from RSP. With this product you can simulate your robot offline in advance and thereby minimize your interference contours on your robot.

All-steel couplings with laminae sets made of high-strength and stainless spring steel. The steel laminae sets were developed based on FEM calculations. Considering the necessary displacement capacity of the steel laminae coupling, we realized the optimum shape with regard to torque transmission and torsional stiffness.

- planning, project management and production of individual steel constructions – sandblasted, primed, painted or fire galvanized. - including railings, stairs, various coverings. - Dynamic and static calculation according to Eurocode 3 (DIN EN 1993) with preparation of verifications of load bearing capacity, serviceability, fatigue strength | large welding verification according to DIN EN 1090-2 EXC 3. - Complete assembly on site. - Application examples: Platforms for robots, robot transfer axes, control cabinets, other system components and crane systems | conveyor technology | clean room applications and much more.

Our ground and hardened steel shafts made from CF53, X46 and X90 offer the highest precision and exceptional strength. Ideal for demanding applications, they ensure excellent performance and long service life. Benefit from our high-quality workmanship for maximum resilience and reliable function in every machine application.

With a comprehensive range of support and anchor rails, Gerdt Seefrid GmbH has established itself for many years as a reliable specialist supplier of electromechanical components. Its customer base includes well-known companies in the switchgear and electrical industries. The product range focuses on 25 different profile shapes, including the frequently used 35x7.5 and 35x15 mm support rails, as well as anchor rails in the dimensions 35x18 and 40x22 mm. The individual profile types are available with various hole sizes, hole shapes, and grid dimensions, as well as in unperforated versions. Depending on the profile type, customers can choose between Sendzimir and hot-dip galvanizing, as well as thick-film passivation. Profiles are also available in bright steel and copper. In total, there are over 80 different combinations, meaning that Seefrid users can find the right profile for their application from a single source, directly from stock. The product range is rounded out by mounting accessories that perfectly match the profiles, such as sliding nuts, hammer-head bolts, flat and diagonal clamps, grounding cables, and flat earthing strips. Seefrid's service offerings are a real highlight. For example, the cutting and hole-punching service for profile rails enables cost savings, especially for medium and large quantities. Customers receive their profile rails cut to the desired length according to their drawings and, if necessary, also punched. This is made possible by a dedicated machine park, which is directly connected to the modern shipping warehouse.

STEIN supports the trend towards electrification with the STEIN 300e, which is based on the STEIN 300. Instead of pneumatics, the stoppers, converters or centering devices are controlled by electric drives. This is a great advantage, especially for clean rooms. As a side effect, you support the green thumb for your production.

Over 30 years of experience with more than 3900 individual customer systems have gone into perfecting STEIN 300. As a result, today STEIN 300 is an optimally coordinated transfer system consisting of an extensive portfolio of sub-assemblies with which the most diverse production processes can be implemented.

STEIN 400 transports large workpieces weighing up to 80 kg (176 lbs) effortlessly and safely through the production process. Thanks to the innovative STEIN SOFTMOVE technology, even these heavy weights are transported collision-free, quietly and parti-cularly gently.

CONFIGURATION INSTEAD OF PROGRAMMING With STEIN CONTROL, STEIN takes over the control of production processes and communication with the workstations. The sophisticated and proven control system has been in use on the market for over 25 years and impresses users with its ease of use and flexibility. Order management, product management and especially the schedule can be easily created and changed without PLC programming knowledge. Especially in times of Industry 4.0, vertical integration has been possible for many years with STEIN CONTROL (ERP/MES).

With STEIN Link, we have developed an innovative shuttle system that makes internal material flow more flexible and efficient. The focus is on maximum adaptability, easy integration, and future-proofing - features that are crucial for modern assembly and logistics processes. The system transports workpiece carriers, crates, or customer-specific superstructures with a payload of up to 80 kg at a speed of up to 50 m/min – directly on the shuttle. A robust aluminum T-profile ensures high tilt stability and smooth running even with off-center loads. A key advantage is the wireless power supply: The shuttles do not require power rails or energy supply along the route. Replaceable batteries ensure the power supply; when the charge level is low, the shuttle automatically drives to the exchange station. The battery can be changed manually or automatically. A battery management system continuously monitors the charge level and ensures maximum availability. RFID tags define logical sections for position and route control. Central software regulates traffic flow, entry permissions, and speed - depending on route occupancy and priorities. In addition, proximity sensors on the shuttle ensure gentle braking when obstacles are encountered. The system has a modular design: switches, curves, lifts, and locks can be easily added. Installation requires only a few screws and can even be done under the ceiling to save space. This makes STEIN Link particularly suitable for retrofit applications or systems with frequent layout changes. The result is a scalable, low-maintenance, and future-proof conveyor system with minimal cabling. STEIN Link helps companies make their processes more efficient, sustainable, and flexible - an innovative contribution to the factory of the future.

Thanks to SOFTMOVE, we transport our customers' products from station to station very gently and with the highest energy efficiency. The intelligent EC motors are controlled directly via STEIN CONTROL and can therefore prevent hard impacts. Motors are switched off as soon as they are not needed. This saves energy and reduces wear. STEIN SOFTMOVE drastically reduces noise and leads to a pleasant working environment.