Exhibitor products

Safety relay for emergency stop circuits and safety door monitoring up to Cat. 4 / PL e in accordance with EN ISO 13849-1. The device is designed for single or dual-channel operation and has monitoring of the start button. The device is available in the following operating voltages: 24 VAC/DC, 48 VAC, 110 VAC and 230 VAC.

Our SAFE C series consists of the SAFE C31, the SAFE C4 and the SAFE FLEX CT. These are safety relays for emergency stop and safety gate monitors, AOPD type II and type IV, safety edges and safety mats as well as two-hand applications up to Cat. 4 / PL e in accordance with EN ISO 13849-1. The devices are designed for single or dual-channel operation. They can also be configured with or without monitoring of the start button. The devices are available with the following operating voltage: 24 VDC.

The SAFE FLEX is a safety relay with selectable function variants. The following functions can be selected by wiring accordingly: - Emergency stop safety switching device Cat. 4 - Cat. 4 safety gate monitor - Two-hand relay type III c cat. 4 - Downstream switching device for AOPD/light barriers Cat. 4 and Cat. 2 - 1-pole protective devices with cyclical monitoring by means of test output Cat. 4 - Monitoring of the direction of movement through various tolerance ranges for monitoring simultaneity - Changes to the wiring during operation are evaluated as faults EN ISO 13849: PLe, Cat. 4 I MTTFd: >100 years / high I DC: 99% / high Supplementary information in accordance with EN 61508: SIL3 I PFH: 2.15*10-91/h l SSF: 94.65%

The SAFE GT is the version with a hex switch, which can be used to set numerous options for the output configuration. Various delay times from 0.3 - 30 s can be set.

With SICK at your side: designing safe and smart robot applications Human safety is essential when working with robots. Our priority is to make the interaction between humans and robots not only productive and efficient, but above all safe. SICK's advanced safety technology plays a central role here. SICK's comprehensive portfolio of safety solutions enables smooth and safe interaction with the robot system, which reduces production downtimes. This can be achieved using intelligent sensors and quickly integrated safety systems. In combination with a wide range of services, from initial consultation, commissioning and maintenance to training and further education, we accompany you on the way to your individual and safe robot application.

Relay PPRS with Push-in-System Our PPRS relay bases with push-in connection system are available in versions for two- and four-changeover relays. The bases are designed for a rated voltage of 300 V and can be equipped with relays and the associated plug-in modules and status displays. In order to ensure the vibration safety of the relay, it is possible to mount a retaining bracket. The pluggable external cross-connectors and doubled connection elements enable simple potential distribution.

SafeGuiding is a technology package for moving KUKA industrial robots manually and intuitively in AUTOMATIC mode. There are two options for this: - via force/torque sensor, e.g. for fast teaching of paths - via an external input device such as joysticks, e.g. for reorienting components or as a manipulator application

The safeRS and safeRS3 safe radar systems are electro-sensitive 3D protective devices for safe personal detection with very high machine productivity. They protect applications in accordance with PL d or SIL 2 in line with ISO 13849-1 and IEC 62061. A radar system consists of an evaluation unit and up to 6 sensors which enable switchover to a protected mode as soon as a person enters the protected area. The high resistance to dirt, dust clouds, wood chips, plastic particles and sparks as well as the insensitivity to ambient light such as solar radiation or infrared waves enables reliable operation, even under the toughest ambient conditions. The radar systems stand out due to their rugged sensor housing and quick and easy commissioning. Benefits -Modular system for adjusting to your protection tasks up to performance level d/SIL 2, in accordance with ISO 13849-1 and IEC 62061 -Extended hazardous area protection thanks to three-dimensional protective field -Very high machine and plant productivity, even under harsh ambient conditions -Reliable use even at extreme temperatures -Radar sensors with long cleaning intervals -Quick and easy commissioning

Für Maschinen, die nach dem 20. Januar 2027 in den Verkehr gebracht werden, gelten die Anforderungen der Maschinenverordnung. Somit sind sie mit einer Konformitätserklärung nach Maschinenverordnung zu versehen. Die Maschinensicherheitsverordnung (MSV) regelt die Sicherheitsanforderungen für Maschinen, um den Schutz von Personen zu gewährleisten, die mit oder in der Nähe von Maschinen arbeiten. Sie löst die EU-Maschinenrichtlinie (2006/42/EG) ab und legt Vorschriften für das Inverkehrbringen, die Inbetriebnahme und den Betrieb von Maschinen fest

Maschinenhersteller und -betreiber sind gemäß der MRL 2006/42/EG (ab dem 20.01.2027 nach der EU-Maschinenverordnung 2023/1230) und dem Produktsicherheitsgesetz (ProdSG) verpflichtet, den definierten Vorschriften für Gesundheit und Sicherheit beim Verwenden neuer Maschinen, generellen Betreiben von Anlagen und bei Umbau oder Erweiterung (Retrofit) zu entsprechen. Eine Risikobeurteilung umfasst das Abschätzen möglicher Gefahren, das Treffen von geeigneten Gegenmaßnahmen und das Warnen vor Restrisiken. Wir begleiten Sie im CE-Konformitätsbewertungsverfahren vorschriftenkonform und stellen die Erfüllung dieser Richtlinien sicher. Unsere Spezialisten unterstützen bei: der Risikobeurteilung nach Maschinenrichtlinie (MRL) oder nach der Maschinenverordnung (EU) 2023/1230 der Bestimmung des Performance-Levels der Begleitung zur CE-Konformität der Erstellung von Sicherheitskonzepten sowie der transparenten und durchgängigen Dokumentation. Weitergehende Unterstützung und Anleitung erhalten Sie im Rahmen von Beratungen (Inhouse und vor Ort an Ihrer Maschine / Anlage). Als Dienstleister für Maschinensicherheit versichern wir unseren Kunden Qualität, welches durch SGS-TÜV Saar zertifiziertes Personal sichergestellt wird.

Safety is not a product, but a process, deeply rooted in the DNA of your automation. Functional safety and industrial security form two strands that intertwine like a double helix. It is only when they interact that the resilience that protects people, machines and data in equal measure is created.

A high level of automation increasingly demands the flexible linking of individual security functions, i.e. a programmable security controller is state of the art when it comes to future-oriented, competitive machines and plants. The innovative and integrated security solution from Berghof includes a CODESYS Safety PLC and a safety I/O module according to the requirements of the safety standards IEC 61508 SIL 3 and DIN EN ISO 13849-1 PLe. - Integrated, module-based safety concept - Fail Safe over EtherCAT (FSoE) - Cross communication between PLC and Safety-PLC - Combinable with other Berghof Products - Online monitoring of safe and unsafe data - SIL 3 according to IEC 61508 - PLe according to DIN EN ISO 13849

Our safety/overload couplings are based on the ball-in-detent principle and they are absolutely backlash free due to the KBK-specific arrangement of the balls as locking elements. Shaft diameter: 3 – 70mm Torque range: 0,2 – 1400Nm

Safety products are installed in potentially dangerous or hazardous areas to safeguard personnel from injury and protect equipment from damage. • Safety Light Curtains • Safety Controllers • Safety Door Switches • Safety Switches • Safety I/O Terminal Blocks

Safety Engineering: -Consulting for functional safety -Risk assessments (MRL2006/42/EC) -Determination of PL/SIL -Operating instructions according to CE -Implementation of safety measures -Evaluation of the safety achieved