Exhibitor products

The CONEC connector series with bayonet quick locking system allows safe and quick locking even in areas that are difficult to reach and/or not visible. With the "three-point" bayonet locking it is possible to lock the connection by hand with a 90 ° turn. You get a direct tactile and acoustic feedback as soon as the connector is locked. The connectors are designed according to the draft standard IEC CD 61076-2-011/Ed1. In order to meet the mechanical requirements with regard to tightness to dust and liquid media in industrial environments, no additional tools are required for the new M12 bayonet version by CONEC. When locked, the requirements of protection degrees IP65, IP67 and IP69K are met. In addition, the new series is shock and vibration resistant according to the railway requirements IEC 61373:2010, class 1B. The CONEC bayonet locking variant thus offers simplified handling and at the same time secure transmission of signals and data to the user. The coupling sockets with solder pin termination are also equipped with an internal thread in the mating area, thus ensuring 100% backwards compatibility with standard M12 connectors. This means that new systems can be equipped with the M12 bayonet on the device side without any concerns. The M12 bayonet series is presented as standard in the codings A and D. The PCB sockets are available in axial and angled form for back panel mounting and a panel thickness of 2.2 mm. Other codings and socket variants are available on request.

Signal|Mate® C091 is Amphenol's compact and high performance M16 circular connector series. The M16-Q sub-series comes with following features and characteristics: Connector size M16 Quicklock system housing and locking ring made from plastic 3-8, 12, 14 und 19 poles Crimp and solder termination up to 10A and 300V protection class IP 68 internal cable strain relief cable connectors and receptacles for rear mounting

In order to make material usage and space requirements in connection technology suitable for the application again, HARTING is presenting circular connectors in size M17. With a power transmission of up to 7.5kW and the increased efficiency of modern drives, the use of an M17 interface offers clear savings potential. With different coding combinations of signal, power and PE, almost all applications for modern drives can be covered.

M23 is the large format phg panel mount connector. The 19 pole device connector has 16 signal and 3 power contacts. The male contacts are crimped to the stranded wires and assembled according to customer specifications. The coding nose can be individually aligned during assembly using the integrated counter system. You will receive ready-to-install and final-tested device connectors from us.

The M2Smart® Gateway is used for safe coupling with the M2Smart® HMI10 and the M2Smart® HMI5. The M2Smart® Gateway is available in different versions, so that mounting in the control cabinet as well as directly on the machine is possible without any problems.

The M2Smart® HMI Access Point enables a wireless connection between the M2Smart® HMI5 or M2Smart® HMI10 and the PLC. This allows operator and visualization data to be transmitted via WLAN or Bluetooth.

Via the “functionally safe” radio connection, the M2Smart® HMI10 makes it possible to meet the high requirements in terms of safety equipment of a machine even with a wireless operating system. Both the emergency stop button, which is obligatory in this environment, and a three-stage enabling switch are located directly on the mobile HMI device. The corresponding signals are packaged in an encrypted “data packet” and transmitted to the M2Smart® Gateway via a Black Channel using Bluetooth. The M2Smart® HMI10 is also available as a wired version with 5 meters, optionally 10 meters.

A high level of safety is required when operating industrial systems and machines. Emergency stop and enabling switches are indispensable functions in emergency situations. The wired M2Smart® HMI10 Wired offers functional safety through these components. The M2Smart® HMI10 Wired is an optimal and robust solution for industry.

In the field of safe and flexible operation of industrial plants and machines, the M2Smart®HMI5 is the optimal, mobile solution. Where stationary or wired operating systems had to be used in the past, the M2Smart® HMI5 with the associated safety components offers completely new possibilities. Via a “functionally safe” radio connection, it is possible for the first time to meet the requirements of, for example, the Machinery Directive in terms of safety equipment of a machine even with a wireless operating system. Both the emergency stop button, which is obligatory in this environment, and a three-stage enabling switch are located directly on the handheld and the corresponding signals, packaged in an encrypted “data packet”, are transmitted via Bluetooth to the M2Smart® Gateway, which takes over the transfer of the data to the machine. A major focus here is on the usability of the system.

Compact signal transmission for minimal installation space

Application-related cable qualities Enlarged outer-jacket for high welding-beads resistance Good drag-chain- and torsion properties Yellow portfolio for safety applications Oil resistant Silicone free Original accessories: Mounting-kits, safety-caps, marking-rings … Y-splitter S89 IP65, IP67, IP68 | UL/CSA

MAC - The complete solution for medium to larger power ratings. With built-in mains power supply. Choose between model with or without brake. Also in IP65 version. Choose Expansion module from an extensive selection for any application. Motor size is: MAC400-D2 400W MAC400-D5 (with built-in brake) 400W MAC800-D2 746W MAC800-D5 (with built-in brake) 746W MAC1200-D2 1182W MAC1200-D5 (with built-in brake) 1182W MAC1500-G2 - 1.5kW MAC1500-G5 (w. brake) - 1.5kW MAC3000-G2 - 3.0kW MAC3000-G5 (w. brake) - 3.0kW MAC4500-G2 - 4.5kW MAC4500-G5 (w. brake) - 4.5kW Features: Absolute multiturn encoder without battery Real-time industrial Ethernet: Profinet, Ethernet/IP, MODBUS TCP, EtherCAT, Powerlink and SercosIII 2 RS422 channels for encoder in/output and SSI encoder etc. 6IO for capture of position, interrupt, counters, enable, timer and PLC functions Expansion module you can choose between: Basic Modules Programmable Modules Field Bus Modules High Speed Multi-Axis Modules Wireless Modules Industrial Ethernet Modules

JVL Industri Elektronik A/S is proud to announce a completely new generation of Mini-MAC (50-141 W) servo motors. This new motor family is based on previous designs and customer feedback collected for many years and offers a wide pallet of options and possibilities which makes this product fit into almost any application. Key features: - High dynamic servo regulator - Industrial Ethernets - 6 protocols - Absolute multiturn encoder unlimited down time (no battery!) - Safe Torque Off (STO) input - Wide supply range 7 to 48 VDC - Very energy efficient - Brake control (ext. brake) - 0 - 4000 RPM / 50 - 140 W - Protection class up to IP67 - Wide program of option modules - Connectors: M12 industrial What is new ? • Absolute multiturn encoder harvesting technology without battery or gear • Ethernet high performance similar to other MAC motors • More advanced FOC filter for lower noise and better motor performance • New Mosfet technology for higher efficiency and cooler motor • Encoder resolution 8196 CPR. Higher resolutions soon to come • STO or Brake connector optional

The MAC802, MAC1202 and MAC1403 represent JVL’s new generation of integrated DC servo motors. Designed for low-voltage operation from 12–60 VDC (typically 24–48 VDC), they combine motor, controller, power electronics and encoder in one compact unit. This significantly reduces cabling, cabinet size and installation time. Performance data: MAC802: approx. 750 W continuous power, 2.4 Nm nominal torque, up to 7.2 Nm peak, length approx. 156 mm. MAC1202: approx. 1180 W continuous power, 3.82 Nm nominal torque, up to 11.46 Nm peak, length approx. 190 mm. MAC1403: approx. 1500 W continuous power, 4.78 Nm nominal torque, up to 14.34 Nm peak, length approx. 200 mm. Peak power can reach up to 4500 W depending on the model. The speed range is 0–3000 RPM (max. 3600 RPM). Key features: Fully integrated design with built-in servo controller, power stage and battery-free multi-turn absolute encoder. Support for multiple industrial Ethernet protocols such as EtherCAT, Profinet, EtherNet/IP and Modbus TCP. Integrated ePLC for standalone, decentralized motion and application control inside the motor. STO safety function (Safe Torque Off). Robust industrial housing with IP55, optional IP66/IP67, and M12/M16 connectors. Wide selection of interface and option modules: RS485, traditional fieldbuses, digital I/Os, CANopen, IO-Link, wireless extensions and more. Application advantages: With their decentralized architecture and compact, all-in-one design, these motors are ideal for compact machinery, mobile or battery-powered equipment, and modern Industry-4.0 systems. They help to reduce wiring complexity, improve EMC performance and simplify installation.