Exhibitor products

For more than 50 years KTR has been a supplier to the hydrauclic industry and for almost 40 years a supplier of more than couplings only. Today KTR is one of the most important, leading suppliers of components for hydraulics throughout the world, including products such as: - couplings - bellhousings from aluminium, cast iron, steel and nylon - bellhousings for rotary current motors and servo motors - oil tanks from steel and aluminium as well as accessories - components for noise damping - components for temperature control and monitoring - tank heaters, oil/air coolers and oil/water coolers

The Hydrolevel® differential pressure transducers are designed to measure the differential pressure of gases or liquids. With its massive process connections, static pressures of up to 250 bar can be measured. Even small differential pressures are possible with high accuracy (measuring error of < 0.2%). The high overload capacity is also a big advantage.

The sensors from the Hydrolevel® HTS 500 series are compact sensors with a display, analog output and 2 switching outputs. They can be adjusted by the customer using 3 buttons on the sensor. Whether measuring range, unit, decimal point, or switching points, the sensor is parameterized with just a few settings. A Pt 100 class A serves as the measuring element. The sensor can be ordered with or without a process connection. The protective fitting (stainless steel 1.4571) can be made in different diameters. Furthermore, the HTS 580 is a variant available in which the protective fitting is separated from the sensor via a cable. Different cable materials are available for high temperature ranges. An optionally available wall bracket simplifies installation.

The LPK 121 series pressure transmitters are designed for continuous level measurement of liquids and gases. The base element is a capacitively measuring ceramic sensor element. The capacitive measuring method meets the highest demands in terms of resolution, reproducibility, hysteresis and linearity. High-quality ceramic material, stainless steel 1.4404 various sealing materials (Viton as standard) guarantee resistance to almost all media. Thanks to the almost front-flush membrane, the sensors can also be used with heavily contaminated media.

The LPK 200 series pressure transmitters are designed for continuous level measurement of liquids and gases. The base element is a capacitively measuring ceramic sensor element. The capacitive measuring method meets the highest demands in terms of resolution, reproducibility, hysteresis and linearity. High-quality ceramic material, stainless steel 1.4404 various sealing materials (Viton as standard) guarantee resistance to almost all media. Thanks to the almost front-flush membrane, the sensors can also be used with heavily contaminated media. Various options are available for process connection. Among other things, food-safe connections such as milk pipe or DRD are also available

The pressure transmitters of the Hydrolevel® LPK.V/SPK.V series are designed for continuous level measurement of liquids. The base element is a capacitively measuring ceramic sensor element. The capacitive measuring method meets the highest demands in terms of resolution, reproducibility, hysteresis and linearity. A pure ceramic measuring cell, stainless steel 1.4404 and various types of seals guarantee resistance to almost all media. The measuring cell without oil filling ensures optimal temperature behavior and very high overload resistance as well as vacuum resistance. The devices are also suitable for use in hazardous areas.

The BLE radar is a compact, portable sensor for recording water levels in fresh, dirty and gray water. The measurement is carried out using radar. Thanks to the internal battery and data transfer to the data logger via Bluetooth Low Energy, the device works autonomously and therefore does not require any cabling at the installation site. The ultra-low power technology used enables a long battery life (up to 10 years) with a short measurement interval and high resolution. The data logger saves the measured values ​​and at the same time serves as a gateway to the web portal. The transmission takes place via LTE or NB1/NB2. The data logger automatically selects the network with the best reception.

The Hydrolevel® power supply and evaluation devices can be used universally! Sensor power, switching points, logging of data, output via interface, parameterization via the front keyboard or a PC, all of these functions are possible with the devices. 2 or 3 conductor sensors, active or passive, can be connected. The modular devices have up to 6 limit values, each with separately adjustable hysteresis. With functions such as pump swapping, fault relaying, window operation, interval operation or even quantity calculation, all imaginable tasks can be solved.

The robust, powerful MMD9000 series monitors with their fully enclosed stainless steel housing, have been developed and designed to ensure maximum sustainability in the sensitive hygiene sector.

KES-GB-FDA Cable entry system The KES system consists of two components. The inner core made of polyamide PA 6.6 GF is crucial for stability and strain relief and is overmoulded with TPE in the sealing areas to ensure tightness according to protection class IP66. KES-GB-FDA is snapped onto the enclosure wall from the outside using the snap-in hooks and screwed through the enclosure wall from the inside using the integrated threaded bushings. The blue FDA-compliant TPE sealing material meets the requirements of food approval 1935/2004/EC and (EU) 10/2011.

Ganter develops sealed standard stainless steel elements that meet stringent hygiene requirements. Maximum hygiene is one of the absolutely basic prerequisites wherever food is produced. However, hygiene also plays a major role in other sectors — from medical technology and the pharmaceutical industry to manufacturers of dispersion paints. Today, it is all about producing products without preservative additives — and this is only possible in production environments which have high purity levels. Since even the tiniest weak points can cause entire production lines to be contaminated, Ganter decided to develop a special series of standard parts that meet the very high EHEDG requirements and the 3-A Sanitary Standard. Ganter offers a variety of knobs, handles, clamping levers, leveling feet and screws under the label "Hygienic Design", all of which are optimized for minimal contamination and easy cleaning. Stainless steel — with either ground or polished surfaces — is the material used in all of these cases. The maximum surface roughness is kept below Ra 0.8 μm, so that dirt particles cannot adhere and can be reliably removed during cleaning. Another key feature of the Ganter standard parts is their freedom from "dead space". There are no interior areas in which substances can accumulate. A hygienically safe sealing concept, verified by software simulation, guarantees that the FDA-compliant elastomer seals are all installed flush with the surface and fulfill their function in the long term. This prevents problems from developing without being noticed. At first glance, most standard parts appear to be located far away from the actual work areas, but airborne spores from microorganisms can spread rapidly and widely. You can find more information online at www.ganternorm.com

The coordinated range of hygienic design solutions from PFLITSCH supports safe and reproducible production processes in the food and pharmaceutical industries. At the same time, it contributes to increased efficiency. For this purpose, the solutions for cable routing, cable feed-through and cable protection are designed for easy cleanability as well as process-safe, time and cost-saving installation.

In the food and beverage industry, strict hygiene standards and harsh operating conditions are essential to ensure product quality and consumer safety. The sensors used must be able to withstand a wide range of media, high temperatures and temperature fluctuations as well as frequent cleaning cycles, in order to ensure smooth operation and reliable processes. Discover the new SM Foodmag flow meter that has been specially developed for the food industry.

The visually appealing stainless steel Panel is ideally suited for use in hygienically demanding areas such as the food industry and pharmaceutical production. In order to produce impeccable food and medication, high hygiene standards must be met GMP requirements are met. The well thought-out design without joints and edges and the use of hygienic screws make cleaning easier. The beveled, smooth surfaces and rounded edges of the Automation Hygienic Panel allow liquids to drain off unhindered and prevent dirt and bacteria from settling. Thanks to sophisticated cooling, the completely closed system works completely without fans and ventilation slots. Due to the housing construction according to protection class IP69, no liquids or dust can penetrate the device. The Touch Panel with hygienic design meets all the requirements of the EHEDG for more hygienic design Machines and is CE certified. All materials that can come into direct or indirect contact with the products are FDA-compliant and withstand the use of typical cleaning agents, disinfectants and high-pressure cleaners. This means that the Panels are also suitable for use in GMP-regulated areas.