Exhibitor products

The DC-Buffer Module C-TEC works with Ultra-Capacitors as an Energy Storage inside the Unit. In Case of an interruption of the DC-Supply, the Energy of the Ultra-Capacitors will be released. The load from the Buffer Module, until it is discharged. The Back-Up time depends on the state of charge of the capacitors and the discharge current. Highlights: - Compact design, assembled in one housing - Maintenance-free - Deep discharge protection, thus unlimited storage period - Operation under extreme temperatures possible (extremely high, extremely low) - No gas generation, installation in hermetic seated housing possible - Fast availability because of short recharge time after discharging

DC/DC converters 20 W to 240 W - 19” mechanics Kniel DC/DC converters supply your systems with reliable and continuous power. Our DC/DC converters can be operated on DC supply voltages with high ripple; additional filtering is not necessary. In addition to standard voltages (5, 12, 15, 24, 48Vdc), we can also manufacture individual voltages specifically for your application. This series is characterized by the following features: - Wide operating temperature range from -25 °C to +70 °C, without derating - Up to 20 % more power for dynamic loads thanks to Power Boost, or up to 45 °C Ambient temperature as continuous output (values in brackets in the data sheet) - General electrical isolation between input and output for universal use - Efficiency up to 90 % - Optionally also available with PFS or VME signal (failure messages) - Output voltages are electrically isolated and freely switchable, even with multiple devices (e.g +15Vdc and -15Vdc from one device, but +15Vdc and +15Vdc also possible) - Practical control characteristics - Low output ripple due to double filter - High mechanical load capacity (oscillation/shock) due to robust mechanical design with special aluminum profiles - All power supplies are adapted to the thermal conditions of the compact 19” slide-in technology

These pressure gauges are designed for testing, adjusting, and calibrating mechanical or electronic pressure measuring devices (pressure gauges, pressure transmitters, sensors, and pressure switches). The pressure gauge consists of a pressure generator, a piston/cylinder unit, and a mass set. The rotary actuator is used to generate pressure that pushes the fluid through the piston. This pressure is balanced by the piston/cylinder unit and allows the device to be calibrated to be compared with the pressure values generated by the standard. These reference devices are used in the factory or calibration laboratory. They are robust, easy to operate, and have high long-term stability. Pressure ranges from 0.1 to 30 bar up to 200 to 7000 bar. Single and double piston versions are available. These pressure gauges can also be equipped with motorization and a terminal. The maximum measuring range of the BH5-10000B single-piston pressure gauge is 200 to 10,000 bar with motorization.

Compact, decentralized servo controllers with IP67 protection for direct machine mounting and maximum flexibility. - Flexible application - two voltage ranges, two form factors, ideal for modular systems - Broad compatibility - all common fieldbus and encoder interfaces integrated - Smart safety - STO & SS1 standard, IP67 protection class for direct machine mounting

Decentralized automation system – zero cabinet Into the field, decentralize, modularize, combine technologies, act more energy efficiently, reduce and simplify complexity and find smart solutions. This is what Vario-X achieves: 100 percent decentralized automation without control cabinets. The Vario-X system solves increasingly complex production challenges. Vario-X is a modular system with solutions for every machine need imagined down to the smallest detail. You can plan and expand your system according to all the rules of the art – flexible, scalable, machine mountable and compact. Our decentralized system eliminates the need for time-consuming installation. Set-up times and error sources are eliminated. Service and down-times are adjusted to your production cycles through predictive maintenance. Sounds complex, but Murrelektronik makes it quite simple! The future of automation is cabinetless.

Deep Learning in MERLIC – Get started now! MVTec MERLIC makes access to deep learning in image processing easier than ever. Predefined tools enable powerful applications without programming knowledge. Take advantage of this opportunity for more efficiency, precision and innovation!

The DEFENDER MICRO features an exceptionally slip-resistant 3D LaserGrip® surface and an ergonomic design that ensures outstanding walk- and drive-over comfort. Its patented self-cleaning hinge and easy-to-use locking system provide reliable handling in everyday operation. Two channels measuring 35 × 30 mm each offer ample space for power cables and water hoses, while a load capacity of approx. 2 t on 20 × 20 cm guarantees maximum safety. Certified to fire protection class B2 (DIN 4102) and tested by DEKRA according to DIN 31000 and EN 61537, the cable protector meets the highest quality and safety standards. The extremely robust, break-resistant TPU construction ensures resistance to oil, acids, petrol, and short-term contact with solvents. With compact dimensions of 1005 × 273 × 45 mm and a weight of approx. 5.2 kg, it is suitable for a wide range of applications – and is also available with custom branding.

Enclosure dehumidifier with integrated humidity controller for DIN rail mounting - Integrated humidity controller - Quick and easy setup - Low power consumption - Easy mounting on DIN rail - High dehumidifying performance - Compact, small dimensions - Light wight - Overtemperature protection - Automatic defrosting at low temperature

Moisture in switchgear cabinets is a serious problem – and one that is often underestimated. Fluctuations in temperature lead to condensation, which in turn causes corrosion, electrical faults and control unit failure. Just one water droplet in the wrong place can have far-reaching consequences, so it is important to prevent moisture from collecting in switchgear units at all costs.

The Delfa AxIIIs is an ultra-compact 3-axis force/torque sensor for integration into small and medium-sized robot systems. The sensor element is based on a novel dielectric elastomer and enables precise force measurements in the z-direction as well as the detection of torques around the x- and y-axes. This allows for high-resolution detection of forces and tilts directly at the end effector. With dimensions of only 49 × 20 mm, the sensor is ideal for space-constrained integrations. I²C and UART interfaces are available immediately, with an RS485 interface to follow. The sensor offers a cost-effective entry into tactile robotics sensing and is designed for both research and development as well as industrial automation applications.

The base of all our products is the knowhow on designing and manufacturing flexible electronics based on polymer substrates. These can be widely used as flexible and stretchable circuit boards, sensor elements, actuators or anything else you can imagine. The ability to form multilayered, polymer-based circuits enables you to build electric active structures with extraordinary features.

This robust and cost-competitive sensor enables force measurement across different applications. Being made of rubber, it tolerates shear forces without damage. It can also be used to measure movements in the range of micrometers. The sensor is equipped with an in-built adaptable electronic that provides standard analog output as well as digital communication IOs. The digital IOs e.g. enable the adjustment of measurement range and alarm criteria – on-the-fly and without any need for mechanical adjustment.

The rubbery structure allows it to be attached to any surface, regardless of its shape (straight, curved, irregular). The softness of the sensor makes it ideal for contact with any object that needs to be gripped and where the contact force needs to be measured. Understanding the gripping force makes the process faster and more reliable and prevents damage to sensitive parts. It is equipped with a versatile electronic that provides analog output as well as digital communication and IOs.

This robust and cost-competitive sensor enables position or displacement measurement across different applications. Being made of rubber, it tolerates installation misalignments while compensating for any measurement error due to misalignment hence making it ideal for retrofitting with a simple mounting process. The sensor is equipped with an in-built adaptable electronic that provides standard analog output as well as digital communication IOs. The digital IOs e.g. enable the adjustment of measurement range and alarm criteria – on-the-fly and without any need for mechanical adjustment.

This type of robot is based on the principle of parallel kinematics. All drives are mounted in a fixed position on the robot head. Motor cables are not moved. The robot has three (3) translational and one (1) rotational degree(s) of freedom. This robot mechanic is suitable for applications that require maximum repeatability, absolute accuracy and path accuracy in the 1/1000 mm range thanks to its high-end direct drives and high-precision joints.