Exhibitor products

Tiger is a SIL3 and PLe certified, robust radio control system adaptable to standard and complex lifting and non-lifting applications in harsh environments. It is available in several radio bands with frequency hopping technology, changing frequencies within a spectrum every 40 milliseconds. SIL3 and PLe Available in different configurations, Tiger receivers provide standard relay and analogue in/outputs, digital inputs and communication via different fieldbus systems, whereas both the STOP function and two designated relays are approved according to SIL3 IEC 61508 standard and PLe, the highest safety rating available in radio control. Tiger is capable of providing feedback from your machine, displayed on the transmitter’s LCD screen or alternatively utilizing LED’s situated next to the transmitter’s function buttons. Systems are pre-programmed with operating modes accommodating hundreds of different user applications. Advanced settings or custom software are available upon request. Our system wouldn’t be complete without a wide range of receivers. We can offer smaller seven relay receivers up to very large receivers with 28 relays. In this range you will also find receivers with bus technology: Profibus, Modbus, CANopen and J1939. There is also the option of an analogue receiver which supports step less, analogue control. Furthermore we also have receivers that can plug-in directly to an application that supports a 10-pin Harting connector. All receivers have high quality casings at IP65 or IP66.

AIXONTEC TIGERConn is a heavy duty connector used for industrial applications such as oil and gas industries, wind energy, railway, automation and mechanical engineering. The high-quality connector offers an easy and secured assembly through an integrated clip lock. The connector system can achieve protection class IP67 in plugged condition. The core of TIGERConn consists of a shielded Cat.6A RJ45 coupling module and RJ45 plug, which ensures secure 10GbE/Class EA data transmissions.

Precise and durable in every situation || For the transport of bulky and heavy parts, Robotunits offers the C4T and C8T timing belt conveyor. Standard lengths up to 12 m are available. For this conveyor we use a special, self tracking timing belt that better withstands lateral forces than conventional belt. Parts are conveyor safely and smoothly since any interfering edges are removed. With the Robotunits Timing Belt Conveyor indexing and positioning applications are easily implemented. By using a connecting shaft, multiple line layouts can be implemented conveniently and economically. Robotunits offers a wide range of different belt surfaces and profiles.

TKHP SERIES “THE GRIZZLY” High-Performance cable carriers for long travel lengths and high additional loads Our new TKHP series is a reliable and efficient cable routing for high-performance applications with travel lengths up to 1.500 meters in rough conditions, such as port cranes or the transport of bulk materials. It can absorb a high level of force, is highly durable and dirt-resistant. 1. Aluminum stays available in 1 mm width sections 2. Plastic chain link plates 3. Quick and easy opening to the inside or outside for cable laying 4. Cable-friendly interior – no interfering edges 5. Fixable dividers 6. Dividers and subdivision for separating the cables 7. Replaceable glide shoes for increased service life in gliding application 8. Robust, multiple stop system 9. Steel installation ¬brackets 10. With integrated roll for standard guide channels 11. With roller damping Features: - Massive, enclosed, stain-repellend stop system - Massive sidebands through robust double ¬fork-bracket-construction - Sidebands easy to assemble - Reinforced symmetrically arranged pin bore connection for better force transmission - Integrated noise damping - Quick and easy opening to the inside or outside for cable laying - Soil-resistant outer contour - Easy change of components - Maintenance-free - Linear force curve in the sideband - Quiet and low-wear operating through polygon-optimized contour and radii - Reduce drive power through less friction

The TM30S streamlines heavy‑duty palletizing with long reach, stable motion, and certified collaborative safety for clean stacks on Euro and US pallets—no riser required. Built‑in vision, compact design, and intuitive setup keep cells flexible and move teams from trial to production quickly. With a 30 kg payload and 1702 mm reach, it maintains cycle consistency under load—enabling fast deployment and reliable throughput. Hardware enhancements Across the S Series, OMRON has introduced upgrades to increase durability and support faster redeployment. All robot arms now feature an IP65 rating for use in washdown or dust-prone environments. Higher-payload units (TM25S, TM30S) incorporate an integrated joint 6 force-torque wrist sensor for improved force-controlled processes. The updated Landmark 2.0 vision-based positioning system is designed to reduce recalibration time when moving robots between stations. TMflow 2.22 software release OMRON has also released TMflow 2.22, an update to its no-code programming environment. The new version introduces more granular safety configuration options, expanded remote monitoring and diagnostics, and a higher-fidelity simulation engine. Integrated vision tools have been strengthened to support inspection and pick-and-place tasks with greater accuracy. “By introducing the TM30S, TM20S, and TM6S alongside crucial upgrades like IP65 certification and the integrated joint 6 force torque sensor, we are empowering our customers to automate their most challenging, heavy-duty tasks with greater safety, precision, and flexibility than ever before. TMflow 2.22 ensures that this immense power remains easy to program and manage, upholding our commitment to harmonious automation,” said Qiqi Wang, Global Product Manager at OMRON Robotics and Safety Technologies. For further information on the TM S Series and TMflow platform.

For years, TOC connectors by Telegärtner have proven themselves in harsh environments. Ordinary IP67 rated industrial connectors offer protection against ingress of dust and moisture for indoor applications, but in outdoor applications there are additional, tougher conditions ordinary industrial connectors cannot support. Outdoor connectors have to be – weatherproof – frost-proof – UV-resistant. And they have to be absolutely water-tight to withstand continuous rain and submersion in puddles or mud. These require an IP68 rating.The robust housing made of nickel-plated brass is tough yet easy to install – closing, sealing and locking with just one twist. The stainless steel TOC series takes connetions to a new level. It offers all the benefits of the proven TOC connector series with nickel-plated brass housing and adds a lot more: The stainless steel housing (material quality 1.4404) is designed for extreme conditions. TOC stainless steel connectors are: • free of death space and easy to clean due to its smooth surface • for areas with high hygienic and cleaning requirements • acid-resistant • corrosion resistant even against salt water • lubricant free • highly abrasion resistant • free of welds • IP69K rated • field assembly with 100 screwing cycles. Typical Applications for Stainless Steel TOC: • Connection of outdoor access points or outdoor cameras • Connection of machines and systems in harsh environments (e.g. controls in tunnel construction, mining or on heavy construction equipment) • Connection of machines and systems with special hygienic requirements like in the food industry If a low IP code is sufficient, our more cost-effective nickel-plated brass version is a good choice. It is not only weatherproof and frost-proof, but also UV-resistant. In our standard portfolio, the brass version is also available with MPO/MTP®.

Latch-type toggle clamps, such as vertical and horizontal acting toggle clamps, have been a permanent feature of the Ganter product range for over 30 years. The expansion of both toggle clamp genres make them the ideal solution for an even wider range of applications. Safety hooks keep the toggle clamp closed securely GN 820.3 horizontal acting toggle clamps and GN 851.3 and GN 852.3 latch type toggle clamps provide a new function: an additional lock prevents inadvertent detachment caused, for example, by vibrations or incorrect operation. When the toggle clamp is closed, the additional safety hook automatically locks and holds the lever in a closed position. The spanner can then be opened, or rather, detached through a simple one-hand operation. The safety hook on the horizontal acting toggle clamps is operated by the index finger, while for the latch type toggle clamps it is opened by pressing from above with the thumb. Now including spindle assembly with rubber tip As previously, Ganter’s horizontal and vertical acting toggle clamps leave no wish unfulfilled: we offer horizontal or vertical mounting bases, as an assembly kit or as a U-bar or solid bar versions. These components have long served as reliable standard parts. The possibility of including an adjustable spindle with a rubber tip is a new option. Until now, these had to be ordered separately as an accessory, for example as the GN 708.1 standard part. The spindle assemblies included in the set correspond to the standard sizes most commonly used – should a specific configuration be required, this can of course be ordered separately. Along with the toggle clamp versions with additional locking as described above, spindle assemblies are also available for GN 810 (vertical acting toggle clamps), GN 812 (with dual flanged mounting base), GN 820 (horizontal acting toggle clamps), as well as for the GN 860 (pneumatically operated spanner) models. Find out more at www.ganter-griff.com

Tolerance rings by Dr. TRETTER® – smart fixation of special applications Engineers have to face many technical challenges in every industry. For applications, several difficulties need to be overcome, for example: Thermal expansion, e.g. of light metal housings Reduction of vibration Reducing noise development Creating torque control Torque transmission Transmission of axial forces Levelling misalignments Bypassing large tolerances of the connecting components Our tolerance rings can help in all those matters and offer significant advantages compared to other connection types. Together with you, we want to meet the challenge and offer you the perfect solution. We support you during development, design your shaft-hub connection, and support you in the construction and testing phase. Thanks to our own production site in Switzerland, we can attend to all your requirements and special requests. Dr. TRETTER will make your innovative product development possible!

The diversity of sensor management If machines or other objects are equipped with sensors, they can be monitored automatically. Data is transferred quickly and reliably to maintenance software such as TOM at a specified interval. The maintenance technician can monitor the status of the machines directly via the software and thus saves a part of the working time through daily rounds and manual measurements. Based on the experience of the maintenance technician, standard and limit values are stored in the digital maintenance planner. If the sensors measure borderline conditions, an alarm is automatically raised. The maintenance engineer can react immediately and use the CMMS/CAFM software to analyze and evaluate the situation and initiate appropriate measures. The possible uses of sensor management are very diverse. In addition to the classic use in the industrial sector, sensors can also pave the way to predictive maintenance in facility management, in medicine and at supply and disposal companies.

TOM auch für iOS und Android Vorteile und Funktionen im Überblick: • Erfassen Sie schnell und einfach Störungen, Arbeitsaufträge oder Zählerstände. • Überblicken, bearbeiten und schließen Sie Aufgaben mobil ab. • Nutzen Sie die Kamera für Belegfotos. • Erhalten Sie einen tagesaktuellen Aufgabenüberblick durch Cloudsynchronisation. • Priorisieren Sie Aufgaben durch die praktische Anpinn-Funktion. • Suchen und Finden Sie benötige Informationen durch umfangreiche Suchmöglichkeiten für das komplette TOM-Profil. • Melden Sie sich über einen gesicherten Zugang über Ihr TOM-Profil und den TOM Schlüssel an. Erfahren Sie mehr über TOM: https://www.tom-instandhaltungssoftware.de

Mit der ISO 50001 soll die Energieeffizienz von Unternehmen gesteigert werden. Dabei stehen die Prüfbarkeit der Ergebnisse und die Nachvollziehbarkeit der Maßnahmen im Vordergrund. Beim Dokumentieren und Analysieren von umfangreichen Zählerdaten und der Zusammenführung mit getroffenen Maßnahmen verlieren Verantwortliche schnell den Überblick für wesentliche Kennzahlen. TOMeda integriert sich als Modul nahtlos in die bestehende Objektstruktur und kann so Objekte, Zählstellen und Vorgänge verknüpfen. In STOP-Maßnahmenplänen lassen sich bereits umgesetzte und für die Zukunft geplante Maßnahmen dokumentieren. Die Auswertung erfolgt dann per Knopfdruck über einen Berichtsdesigner oder als frei konfigurierbares Dashboard – perfekte Voraussetzungen für eine Zertifizierung nach ISO 50001.

Tool changer from 5 kilos to 1500 kilos