Exhibitor products

Ready for the future: With SINAMICS S220, experience a new system architecture today for tomorrow’s full potential – your advantage starts now. Powerful. Precise. Progressive.

Sine filters effectively protect the motor insulation with frequency inverter drives and thereby extend their lifetime. They reduce supplementary losses and noise emissions from the motor. All-pole sine filters also enable the use of unshielded motor lines. The reduction in common mode currents in the system’s grounding scheme minimizes leakage currents and results in optimum EMC performance for the drive. The sine filter achieves a very high filter effect through precise low pass adjustment to the frequency inverter’s switching frequency. BLOCK sine filters are produced with Future Winding technology and are therefore specifically optimized for performance. They achieve a better cooling effect compared with traditional filters along with lower proximity losses.

The new SNT single column is characterized by its high-precision and stability, which is made possible by specially bonded profiles. Thanks to the new guide technology, which enables minimal frictional forces, a very low noise level is guaranteed. The column is also characterized by its high stability thanks to its geometry. Ergoswiss offers 2 variants for different applications: SNT 1770 lifting column - Maximum flexibility • Installation length: 560 mm • Stroke length: up to 700 mm • Areas of application: Industrial- and control room workstations, monotables • Advantages: High stability, long stroke length, versatile mounting options SNT 1740 lifting column – For limited installation lengths • Installation length: 380 mm • Stroke length: 400 mm • Areas of application: Industrial, logistics workstations and medical technology • Advantages: Compact design for limited installation lengths, precise guidance, stable construction The two variants consist of three anodized aluminium profiles, which are guided by a patented assembly and guide process. Up to 4 lifting columns can be connected to one SCT control box and operated synchronously. T-Slots on 2 sides (width 6 mm) allow the attachment of trusses, clipboards, attachments and superstructures along much of the leg. Our powerful battery solution is the ideal addition to make these workstations flexible and mobile. The 24V control unit is powered by a rechargeable battery, which enables uninterrupted operation. Thanks to this technology, the application is no longer tied to power sockets and the workstation can be adapted entirely to the customer's needs and requirements. In this way, we create further optimization options that increase productivity.

The good news is that the further development of Ethernet transmission technology and PoE power supply with currently up to 90 W also creates new applications with Ethernet interfaces. In addition, there is a growing need for uniform, lean transmission technology, both in terms of the transmission protocol and the hardware, connectors and cabling. Ideally, right down to the field level to the sensors and actuators. This should be possible with Single Pair Ethernet (SPE). With the start in the automotive industry, the technology begins to find its way into industry and, in the long term, into buildings. The SPE topic has been known for some time and since the SPS 2019 trade fair at the latest, it has made itself felt in all media. As an innovative manufacturer for high quality in the field of contact technology and connecting elements in the market segments of industrial electronics, data and communication technology as well as in building technology, we at METZ CONNECT also deal with single pair Ethernet technology. Be it in devices, control cabinets, systems or infrastructure, both in industry and in buildings. Based on market knowledge, we assume that the first SPE applications will develop in industry. METZ CONNECT begins the first step with premium membership in the Single Pair Ethernet Industrial Partner Network. We are one of more than 30 strong partners to support the IEC 63171-6 connectors. We look forward to actively working in the SPE Industrial Partner Network. In Single Pair Ethernet we see a groundbreaking technology for the development of further Ethernet-capable end devices, sensors and actuators, be it at the field level in industry or in smart buildings.

Single Pair Ethernet (SPE) - Compact Network Solutions for Industry 4.0 and IIoT One Pair of Wires - An Infinite Number of Applications Single Pair Ethernet (SPE) reduces data transmission to a single twisted pair of wires and enables: - Data rates of up to 1 Gbps - Transmission distances of up to 1,000 meters - Power over Data Line (PoDL) and hybrid installations using the same cable - Multidrop networks for flexible topologies This significantly reduces cabling effort, and in many cases, existing infrastructure can continueto be used. SPE establishes unified, Ethernet-based communication from the sensor to the cloud and is considered a key technology for Robotics, Industry 4.0 and IIoT. Benefits such as space, weight, and costsavings make SPE ideal for industrial and commercial applications. With the upcoming IEC 63171-7 ED2 standard, future-proof solutions are emerging that optimally prepare networks for the requirements of Industry 4.0 and IIoT. Single Pair Ethernet (SPE) simplifies data transmission by using just a single wire pair for communication. While traditional Ethernet often reaches its limits on the field level – due to complex installation, limited range, or lack of robustness – SPE provides a streamlined, efficient, and reliable alternative. Benefits of Single Pair Ethernet (SPE) - Unified communication: End-to-end Ethernet-based networking from the sensor to the cloud - Standardized & future-proof: Based on international standards (IEC 63171-7 ED2) - Efficient infrastructure: Reduced cabling effort; existing installations can often be reused - Extended range: Data transmission up to 1,000 m - High data rates: Supporting speeds up to 1 Gbps - Power over Data Line (PoDL): Simultaneous transmission of data and power - Resource-saving design: Lower weight, smaller bend radius, and compact dimensions SPE creates a simplified infrastructure and is regarded as a key technology for Industry 4.0, Roboticsand the Industrial Internet of Things (IIoT).

Ø 10-21 mm insulated round connectors feature high safety functionalities and are thus especially dedicated for high requirements purposes in low voltage areas. These plug&play connectors are specified for 5,000 mating cycles and guarantee the necessary longevity while used for temporary power supply applications or in industrial rough environment conditions. Color and mechanical coding provide high safety and reduce any risk of wrong connection. Depending on the rated current, three models are available: 10BV up to 250 A, 16BL up to 630 A, 21BV up to 1,000 A. BENEFITS Large operating range, from 6 mm² to 400 mm², 250 A to 1,000 A Proven reliability (IP68, IP69) High safety properties (IP2X, bayonet locking, color and mechanical codings, locking pin) Easy handling and fast commissioning Long durability and reduced maintenance costs APPLICATIONS Utilities and temporary power supply application (mobile power generator, distribution cabinet, …) Test bench and laboratory facilities Mining and public works vehicles Metal & glass industry Electric vehicles (automotive & shipping) Railway maintenance application Data centers and telecommunications Renewable energies Field of application for …-GS connectors: drilling machines, automotive test bench, machining center Integration by OEM manufacturers in the utilities and industrial segments KEY FEATURES Up to 5,000 mating cycles Crimp and AxiClamp cable terminations

SINULASTIC® highly flexible flange couplings for versatile applications KTR SINULASTIC is a modularly structured series of highly flexible flange couplings based on a disk-shaped coupling body. Four practical basic versions with individual properties cover a wide range of applications primarily for diesel engine drives, but also general drive tasks.

With SIRIUS Control, you always have the right solution at hand. SIRIUS is a modular system with a uniform design and numerous combination options. You also benefit from more than 50,000 pre-tested and approved combinations for the most common applications. High-quality CAx data simplifies electrical design and saves you time in control cabinet construction.

Training and use on the same IPC hardware Artificial intelligence (AI) is currently an absolute megatrend. Classic areas of application in industry today are primarily two areas: systems that optimize themselves over time, and the recognition of patterns or the detection of anomalies. While training AI generally requires high computing power, specially optimized anomaly detection can also be implemented with a narrow-bodied computing unit. EFCO has developed a scalable AI concept so that users can concentrate fully on the AI. The computer hardware remains the same.

Manage production orders Recording production data, machine data, operating data, fault messages Archiving and evaluating the information

Featuring all of the benefits of the GV3 system, SL2 is a corrosion resistant, stainless steel linear guide system for use in food and medical industries, or corrosive environments. Offers all of the inherent benefits of GV3 system – But with hardened stainless steel bearings and slides for any application requiring corrosion resistance. Corrosion resistance – Suitable for any application requiring corrosion resistance or for use in specialist environments including clean room, wash down and corrosive environments. A solution for challenging industries – SL2 is ideally suited for nuclear, food and beverage, medical, pharmaceutical, electronic, and scientific applications. Lubrication options – A range of special greases are available for use with food applications, in clean room environments or when performing under extreme temperatures or in a vacuum.

Due to its modern design, the SL5000 clearly stands out from previous control housings and is convincing nevertheless due to its high flexibility and modularity. Four different profiles in combination allow a wide variety of applications and profile depths - optionally as a front or rear door version. The contour of the profiles offer a very high rigidity, whereby different dimensions in height and width can be realized, also in combination with an additional desk housing. The front can be designed as a classic front panel as well as a full-surface glass front or as a combination with dividers. The high degree of protection, individual colouring and mechanical processing round off the SL5000.