Exhibitor products

Drive technology – electrical and mechanical Small gear motors, Brushless systems, Stepper motors, Servo motors, Asynchronous motors, Frequency converters, Linear systems, Low-backlash gearboxes, Smart motors, Smart systems

MOTORS THREE-PHASE MOTORS FROM 0.12 kW UP TO 45 kW KEB three-phase motors are robust work machines designed for use in a wide range of applications and are optionally available with a brake, encoder and forced ventilation, etc. They form the basis for the KEB-Drive selection software for industrial drive motor configuration. SERVO MOTORS FROM 0.2 Nm UP TO 100 Nm High dynamics for speeds up to 8,000 rpm and rated peak torques of at least 500 % are the characteristic qualities of the DYNAMIC LINE permanent magnet servo motors. They are equipped either with a robust resolver or a high-resolution single or multi-turn absolute encoder for position feedback plus an optional holding brake. GEARS HELICAL GEARED MOTORS FROM 60 Nm UP TO 13,600 Nm High reliability, compact design, wide gear ratio – the KEB helical geared motor is a must for every modern facility. SHAFT MOUNTED HELICAL GEARED MOTORS FROM 245 Nm UP TO 8,900 Nm The robust and durable construction of the KEB shaft mounted helical geared motor offers the combination of optimal performance and convenient mounting options. HELICAL WORM GEARED MOTORS FROM 55 Nm UP TO 1,160 Nm With the upstream helical gear stage the KEB helical worm geared motor combines high torque and low speed in a most compact design with lateraloutput. HELICAL BEVEL GEARED MOTORS FROM 58 Nm UP TO 12,200 Nm Highest performance levels, optimal efficiency factor as well as the wide speed range make the KEB helical bevel geared motor an excellent choice for demanding applications.

• Production of parts lists, automatic machine programs and manufacturing documents and inspection and test records per the DIN EN ISO 9001 standard • Circuit board filters • SMD mounting with three machines • Manual mounting • Wave and reflow soldering • Tempering of the finished circuit boards • Check and final inspection of the circuit boards • Device mounting with final check and packing • Production in the shortest runs to the longest runs • Design of new devices in Solidworks 3D (from design to device – everything from one source)

New to Ganter’s product range: Mounting clamps with swivel ball joint for precise adjustments with high stop torque for low torque power as well as the option of customer-specific adaptations. For some time Ganter has offered axial ball joints under standard GN 782 that are particularly suitable for smaller installation spaces. These joints can be mounted with a knurled union nut if a lower stop torque is required, while a higher stop torque can be achieved with an open ended wrench. Ganter has now introduced the GN 784 mounting clamp with swivel ball joint series for applications which require a higher stop torque while. The new mounting clamp provides a larger rotating range of 360° around the vertical axis, thereby ±90° of the position predetermined by the swivel ball joint and ±30°of tilt angle in every position. The joint is therefore ideal for the adjustable assembly of cameras, lighting objects, air nozzles, monitors or scanners. The swivel ball joint mounting is as easy as it is ingenious: a screw with a cone tip which is operated through an adjustable hand lever or with an internal hexagon moves the casing downwards and presses the ball into the pan-shaped base element. The high effectiveness of the clamping mechanism allows for high retaining powers to be achieved on the ball with a small tightening torque. In addition, the combination of the material surfaces between the ball and casing (aluminum, black – anodized) contributes to high friction within the fixed joint. For clamping with infrequent adjustment the hand lever can be omitted and the internal hexagon threaded stud option used instead. GN 784 mounting clamps come in four sizes, with the ball joint available in a tapped thread or threaded stud type version. Customer-specific swivel ball joint connections can be supplied economically even in comparatively small unit quantities.

MOVI-C®, the modular automation system for all-in-one solutions from a single source MOVI-C® is the all-in-one solution for automation tasks. Whether you want to implement standards-based single-axis or multi-axis applications, particularly complex motion control applications or customized automation solutions, MOVI-C® can help you do all that and give you the scope to achieve optimum automation for new projects. Your benefits: MOVI-C® is the all-in-one modular automation system from SEW EURODRIVE. This end-to-end solution from a single manufacturer covers all your needs – planning, commissioning, operation and diagnostics software, electronic control and monitoring devices, mechanical drives and gearmotors. There is only one place you have to go to for all the automation components you need. Naturally, all components can be fully integrated into all automation concepts, fieldbus topologies and network standards. You have complete freedom when it comes to the communication topology, as MOVI-C® harnesses all communication advantages – from PROFIBUS and Industrial Ethernet to Modbus and, in the future, OPC UA. MOVI-C® offers automation and a whole range of benefits from a single source – specifically, a company that is both an automation specialist and a manufacturer. The four components are: - Engineering software - Control technology - Central and decentralized inverter technology and - Drive technology and - Power and energy solutions Together, these components form one complete, end-to-end modular automation system made up of devices and field units that you can combine to suit your requirements and bus topology perfectly.

MovingCap FATtrack – proven technology “rolled out” again. The MovingCap Flex-Print control is already in use in over 70,000 servo drive units. Of course, it was very obvious to use the proven concept in other drive variants. The MovingCap FATtrack is the more powerful variant of the MovingCap flatTRACK for applications where more load has to be moved. The compact “all-in-one” design has also been consistently implemented in the MovingCap FATtrack. Integrated motor and sequence control Fieldbus interface with web interface Industrial-grade M12 connector technology Absolute encoder length measuring system Robust and highly precise guide and drive system Easy to maintain thanks to clear and accessible mechanics MovingCap FATtrack, our linear direct drive for applications in production, series and special machines. The compact design, high accuracy, dynamics and service life are complemented by easy commissioning. It’s time to rethink! The resource-saving and recyclable design made of high-quality metal parts allows for easy maintenance, repair and remanufacturing. Therefore, we buy back our MovingCap FATtrack axles at any point in the product life cycle if necessary in order to refurbish them for further use or to recycle the raw materials. Let's conserve resources together when using materials, installing, commissioning and maintaining them.

MovingCap flatTRACK - proven technology "rolled out" in a new way. The MovingCap Flex-Print control system is already in use in over 70,000 servo drive units. So it was only natural to use the proven concept in other drive variants. The MovingCap flatTRACK is the logical consequence of expanding our drive portfolio. The compact "all-in-one" design has again been successfully implemented in the MovingCap flatTRACK. Integrated motor and sequence control Fieldbus interface with web interface Industrial M12 connector technology Absolute encoder length measuring system Robust and highly accurate guide and drive system Easy maintenance due to simple and accessible mechanics MovingCap flatTRACK, our linear direct drive for applications in production, series and special machines. The compact design, high accuracy, dynamics, and service life are complemented by easy commissioning. It's time to rethink! The resource-saving and recyclable design made of high-quality metal parts allows easy maintenance, repair and remanufacturing. Therefore, we also buy back our MovingCap flatTRACK axes at any point in the product life cycle, if necessary, to refurbish them for further use or to feed them into raw material recycling. Let's save resources together during material usage, installation, commissioning and maintenance!

MovingCap maxTRACK modules - developed from the combination of our compact drives with high-quality toothed belt axes. Linear movements up to several meters in length are thus efficiently and economically brought to the track. The quality and robustness of the combined components enable high repeatability and dynamics combined with a long service life and freedom from maintenance. The MovingCap maxTRACK components are precisely matched to each other and can be easily and cost-effectively combined to form systems. You receive all components from a single source - interface problems are avoided. You already know the simple and uncomplicated handling of our drives from the MovingCap turnTRACK drives. The facts about our MovingCap maxTRACK axes: High load capacity: Very massive carriage center section to avoid lateral bending up of the carriage legs Guides arranged at the most stable position, thus no compression of the profile Favorable moment support due to wide and long slides Optional profile reinforcement, also retrofittable High precision: Rollers adjustable backlash-free by eccentric and protected by felt wipers Slides longitudinally adjustable via belt mount Highest traversing accuracy by spindle drive or AT timing belt with steel core Precise steel belt pulleys with bearings on both sides, optionally also with reinforced drive journal for extremely large couplings High user-friendliness: MovingCap turnTRACK drives Simple profile mounting High ease of repair 2-fold 120° rotatable guide shafts in case of wear

"We need a compact, easy-to-configure and easy-to-control electric short-stroke cylinder" - these were the words of a customer Here it is: MovingCap pushTRACK An electric short stroke cylinder with 45 - 115mm stroke in different force and speed classes. In many cases, short linear positioning operations are required in automated production systems. The linear movements are conventionally realized by pneumatic cylinders. The problems of pneumatic systems are well known: an enormous waste of energy, complex infrastructures for the additionally required compressed air, as well as a high maintenance effort. With our electric linear actuator, we offer the right solution to replace pneumatic cylinders and space-intensive electric alternatives. A direct plug & play into existing systems is very easy, as the flange dimensions are based on the pneumatic compact cylinders according to ISO 15552. MovingCap pushTRACK represents an end-to-end optimized mechatronic system consisting of electrical drive technology mechanics, and integrated sensors and control electronics. The telescopic arrangement allows the push rod to be nested without sacrificing motor performance and power. This results in a very favorable ratio of stroke to overall length. Peak forces up to 750N Speeds up to 1.2m/s. Supply voltage: 24Vdc / 48Vdc

The MovingCap shortTRACK is the latest addition to our drive portfolio. The shortTRACK is perfectly suited for applications in limited spaces where high accuracy and speed are required. Features: Integrated motor controller Fieldbus interface with web interface Industrial-grade M12 connector technology Absolute encoder length measuring system with 0.4µm resolution and +/- 1.2µm accuracy Robust and highly accurate guiding and drive system Maintenance-friendly with clear and accessible mechanics 9N nominal force and up to 28N peak force Up to 1.8 m/s speed The MovingCap shortTRACK is our linear direct drive for use in production, series, and special machines. The compact design, high accuracy, dynamics, and lifespan are complemented by easy installation. It's time to rethink! The resource-efficient and recyclable design made of high-quality metal parts allows for easy maintenance, repair, and refurbishment. Therefore, we also buy back our MovingCap shortTRACK axes at any point in the product lifecycle if needed, to refurbish them for further use or to contribute to raw material recycling. Let's together conserve resources in material usage, installation, commissioning and maintenance.

Our MovingCap turnTRACK series: Compact EC servo drives with fieldbus interface flexibly adaptable to your needs. The modular drive configuration enables an innovative drive concept for the economic realization of your drive tasks. Different interfaces, motor variants, planetary gearheads, brakes and encoder systems can be combined. A application-oriented drive design conserves resources and reduces costs. The robust design and the industrial M12 connectors allow the use even under harsh environmental conditions. Different interfaces, the integrated WEB interface (TCP/IP variant) and a Python Script Interpreter keep every movement running. Voltage range: 24 - 48Vdc Power range: 50 - 600W Weight range: 0,6 - 3kg Interfaces: CANopen, TCP/IP Ethernet, Digital I/O (EtherCAT/Profinet in preparation)

Movinor low voltage servomotors, T series These brushless synchronous servomotors with 6-pole stator have been completely redesigned and designed. The modern concept of the magnetic circuit, the winding and the insulation creates torque reserves and increases the service life considerably. A wide range of options is available as standard for the entire motor family, including additional mass inertia. If required, customer-specific adaptations are also possible. Movinor Low Voltage Servomotors, N Series These motors with stators designed using pole winding technology are extremely compact. Thanks to constructive optimizations and the use of stronger magnets, the power density could be improved by up to 40% compared to the T series, depending on the flange size and motor length. A large number of options are also available here, but less extensive than with the T series.

The synchronous servomotors of the series MOVINOR LN are brushless permanent magnet synchronous servomotors with sinusoidal back EMF and with neodym permanent magnets at the rotor. Therefore they are particulary suitable for high-quality servo applications, for example positioning demanding high standards of dynamics and accuracy. The new concept of the LN series optimizes the heat dissipation and improves the magnetic flux inside the motor. The modern segment winding technology with also reduced size of lamination accomplishes a servomotor with an outstanding ratio of torque / volume-content.