Friedemann Wagner GmbH Handhabungstechnik
About us
Development, design, manufacturing, assembly, and distribution of pneumatic handling units.
We have been a manufacturer since 1979❗️Our products are also available under other brands on the market.
Rotary indexing tables | Rotary actuators | Lifting units | Linear units, linear slides | Parallel grippers | Matching accessories.
Over 45 years of experience as a manufacturer in the market. The products are available in various designs and sizes as standard or catalog items and are easy to assemble using a modular system with centering rings.
We have completed numerous customer-specific series projects with our own special solutions for well-known players!
Products & services
pneumatic driven ❗️ mini linear unit ❗️ with mini gripper
✅ LSM-3 – our mini linear slide ✅ for the automation of small workpieces ✅ pneumatic driven ✅ 3 stroke lengths (20, 35 and 50 mm) ✅ with or without mounted shock absorbers ❗️2 guide carriages (sealed ball bearing guides) ❗️recommended payload of 0.5 kg is 5 times higher than the item weight ✅ hardened stop screws ✅ external stops ❗️ repeat accuracy +/-0.01 mm ✅ stop screws for stroke adjustment ❗️ stop screws are hollow = sensor holder. ✅ no additional interfering dimensions, installation space is used optimally ♻️ little air consumption as small workpieces to be moved ♻️ little installation space ❗️ matching mini gripper (PGM-29) ✅ can be mounted by grid e.g. at the front of the head of the linear unit Technical data LSM-3 ✅ Stroke lengths 20 mm, 35 mm, 50 mm ✅ lifting force 11 N, retraction force 7 N ✅ Max. payload 0.5 kg ✅ Repeat accurracy +/-0.01 mm ✅ Stroke adjustable on both sides 15 mm ✅ Guide: 2 guide carriages (sealed recirculating ball bearing guide) ✅ Weight 60-100 g depending on stroke length ✅ Option: with mounted hydraulic shock absorbers ✅ Centering system – e.g. B. to accommodate mini gripper PGM-29 Technical data parallel gripper PGM-29: ✅ Stroke per jaw 2 mm ✅ Repeat accurracy +/-0.02 mm ✅ Finger length max. 15 mm ✅ Clamping force at 6 bar: 16 N ✅ Recommended workpiece weight 0.13 kg (force-fitting) ✅ own weight 0.025 kg ✅ Query option via sensors
Mini swivel unit ❗️ pneumatic driven ❗️gripper PGM-29
✅ extremely compact swivel unit ✅ 0-190° adjustable ✅ for small installation spaces and small workpieces ✅ effective torque of 0.3 Nm ✅ 3.5 kgcm² mass moment of inertia ✅ depending on requirements with | without hydraulic dampers ❗️ External stop screws = full torque in the end position ✅ Repeat accuracy of ± 0.01° ❗️ hollow stop screw = place-holder for sensor ❗️ see image: despite the smallest dimensions, optionally with 2 air grommets ✅ Air grommets supplies parallel gripper through the rotating unit ♻️ Short compressed air paths, no torsions ♻️ small workpieces need little air consumption ♻️ small workpieces need little space Technical data parallel gripper PGM-29: ✅ Stroke per jaw 2 mm ✅ Repeat accuracy +/-0.02 mm ✅ Finger length max. 15 mm ✅ Clamping force at 6 bar: 16 N ✅ Recommended workpiece weight 0.13 kg (force-fitting) ✅ own weight 0.025kg ✅ query option via sensors
Rotary indexing tables ❗️4 sizes ❗️manufacturer
❓ You may know our tables with a different label❓ ❗️We are manufacturers since 1979 ✅ pneumatic + manual rotary indexing tables ✅ standard products from stock ✅ customer-specific projects/rotary indexing products ✅ integrated throttle for adjusting the table speed ✅ control via one (!) 5/2 valve possible ✅ various. sizes up to 70 kg clamping weight / 30 Nm torque ✅ hydraulic damping included ✅ monitoring by initiators possible ♻️ option: wear-free pneumatic damping for RSE-6/RSE-9 ✅ partitions 2 to 24, depending on variant ❗️ uneven divisions for RSE-6 or RSE-9 (e.g. 7 or 13) ✅ direction of rotation: right or left ✅ for RSE-3 and RSE-4: alternatively oscillating operation ✅ for RSE-3 and RSE-4: direction of rotation can be changed by the customer ❗️ for RSE-4 and RSE-6-M, partition can be changed by the customer (kit) ✅ for RSE-6 / RSE-9, fixed center hole ❗️ for RSE-4, air grommet to G1/8" in the plate center ✅ RSE-6-M = manual turning, automatic locking, pneumatic release
Manufacturer of pneumatic driven modules
Made in Germany We are manufacturer of precise and durable pneumatic handling modules, modular, in different sizes ✅ rotary indexing tables (pneumatic or manually driven) ✅ swivel units ✅ lifting units ✅ linear units ✅ parallel grippers ✅ accessories ✅ wide range program " off the shelf" ✅ customerspecific solutions. Brochures in "MEDIA" below are in German AND English language!! website: https://wagnerautomation.de/en brochures see here: https://wagnerautomation.de/en/downloads/ productfinder: https://wagnerautomation.de/en/productfinder/
Swivel Units - ❗️ a bit different than others
✅ Manufacturer of swivel units with full torque in the end position half! ✅ Angle of rotation adjustable from the outside using stop screws ✅ Screws are clamped after adjustment ❗️ hydraulic shock absorbers only decelerate - the stop is the screw itself ❗️ ❗️ repeat accurracy +/- 0,01° as not depending on gear❗️ ✅ hydraulic shock absorbers can be reached from the outside ✅ stop screw is hollow and serves as a holder for the sensor ✅ space-saving, all interfering edges on one side ❗️Design principle enables detection of a shock absorber failure ❗️ ✅ Air grommets in the rotating stop surface as variants ✅ electrical signal feedthrough for larger units (variants)
Parallel gripper PGM - simple, robust, reliable
✅ Parallel gripper PGM ✅ simple principle ✅ repeat accuracy at +/- 0.02mm ✅ always centering system ✅ open construction - dirt also can escape ✅ PGM can be blown out and lubricated when installed ✅ in various sizes with 2mm to 15mm stroke per jaw ✅ available from stock ✅ recommended workpiece weights @ PGM-29: 130g, @ PGM-140: 7.2 kg ✅ prompt-query via proximity switch (inductive, partly C-slot)
Rotary indexing table RSE-4 - can be changed in direction and partitions
✅ pneumatically driven rotary indexing table RSE-4 ✅ can be installed in any position ✅ partitions 2/3/4/6/8/12 and 24 ✅ direction of rotation L/R can be changed by the customer by converting kit. ✅ vontrol can be done via ❗️ONE ❗️ 5/2 control valve. ✅ adjustment of the rotation speed of the table via exhaust air throttle (integrated). ✅ Division kits for changing the partition by the customer ❗️ oscillating operation as an order variant or with a conversion kit ✅ effective torque of the table is 2Nm @6bar (theoretically 3.5Nm). ✅ max. dynamic load weight is 14kg, ✅ max. moment of inertia 175kcm2 ✅ repeat accuracy is +/-0.03mm @ D= 120mm
Linear unit with cross roller guides - ❗️more load on same space
✅ pneumatic driven linearslide LSK ✅ cross roller guides for precise absorption of high torque loads ✅ repeat accuracy +/- 0,01mm as external stop positions ✅ 2 sizes: LSK-4 and LSK-6 ❗️own guides in which the cages run reduce the installation space❗️ ❗️this enables us to install / use larger rollers ❗️ ❗️up to 50% higher forces compared to others in the same installation space❗️ ♻️ Our active contribution to sustainability and resource efficiency. LSK-4 -stroke length 20, 30, 45, 60, 75 or 90 mm -lifting force 45N @ 6 bar -recommended payload 3kg -available in version with/without mounted shock absorbers LSK-6 -stroke length 30, 50, 75, 100, 125, 150, 175 or 200 mm -lifting force 76N @ 6 bar -recommended payload 22 to 10 kg depending on stroke -available in version with/without mounted shock absorbers
pick & place - kit in different strokes and functions
✅ Modular pick+place system ✅ Horizontal movement via linear unit LEN-6 ✅ Stroke lengths 100, 200, 300 or 400mm ✅ Vertical movement via vertical unit VEN-6 ✅ Stroke lengths 80, 120, 180, 240 or 300mm ✅ Intermediate position module for placing on a different level ✅ in suitable vertical stroke lengths 80, 120, 180, 240 or 300mm. ✅ Air and signal integration through the units to the mounted gripper optional ❗️System is already equipped with dampers and sensors ex works ❗️ ✅ Matching tripod in the accessories. ✅❗️ can be mounted on swivel unit SES-9❗️ ✅ Parallel gripper of the PGM series - see brochure link attached.
Lifting unit with cross roller guides
✅ Lifting unit HEK-4 and HEK-6 ✅ Cross roller guides for precise absorption of high torque loads ✅ Cross roller guides diagonal to the base plate ✅ Repeatability +/- 0.01mm through external stops ✅ Stroke length can be influenced using the hollow stop screw ✅ Delivery condition with or without mounted shock absorbers ✅ Sensors for installation in the hollow stop screw (accessory) ✅ Unit can also be installed horizontally. HEK - 4 ✅ Lifting force 80 N ✅ Stroke lengths 10mm and 25mm HEK - 6 ✅ Lifting force 185 N ✅ Stroke lengths 25 and 50 mm
Power Pack ❗️ Swivel Unit SES-9 ❗️full torque in end-position
✅ Pneumatic rotary actuator SES-9 (swivel unit) ✅24 Nm torque (@ 6 bar) ✅ full torque in the end positions ✅ 0-190° adjustable from the outside ✅ max. moment of inertia 64,200 kgcm² (@ 6 bar) ✅ with hydraulic shock absorbers ex works ✅ optional: sensor can be screwed into the stop screw ✅ optionally available as variants with air / signal feedthrough ❗️ third position can be reached via additional module
manually driven rotary indexing table
✅ simple, reliable and cost-effective solution ✅ for partially automated (hybrid) workplaces ✅ for manual workstations with processing stations ✅ no provision of drive technology, safety technology, two-hand operation, etc. necessary. ✅ self-locking after manual rotation ✅ backlash-free indexing of the rotary indexing table ✅ unlock after machining the workpiece via pneumatic impulse ✅ manual rotation until the next division ✅ unlocking via 3/2 valve e.g. push button ✅ table is rounded, reduces the risk of injury ✅ four-point bearing of the plate enables any installation situation ✅ tilting moment: up to 300Nm ✅ plate already has mounting holes for workpiece or workpiece carriers ✅ end position query via M8 sensor ✅ factory-fitted direction of rotation anti-clockwise | can be ordered on the right ✅ can be ordered ex works in pitches 2|3|4|6|12. ❗️partition and direction of rotation can be changed by the user (conversion kit) ❗️flexible application options ❗️retention of the investment in equipment
Wagner stop system - stop screw with sensor - damper only retards
✅ Adjust the stroke with the stop screw (screw in and out) ✅ Adjust the damping ➡️ the stop screw, not the damper, gives the stop position! ✅ Clamp the block with the stop screw and damper ✅ Insert the sensor into the hollow stop screw and adjust, fix it with the knurl
Construction kit | Centering system from Wagner
✅ Grid dimension with centering bores ✅ Centering rings (fit h6) ✅ Quick joining and assembly without drilling ✅ Adapter plates in the accessories
Rotary indexing tables ❗️ odd divisions possible
✅ Pneumatic rotary indexing tables RSE-6 + RSE-9 ✅ can be ordered in odd divisions, e.g. division 7❗️ or division 13 ❗️ ✅ basis of the function is the lateral locking of the table ✅ RSE-6: all integer partitions from 4 -18 ✅ RSE-9: all integer partitions from 4 -24 ✅ available with hydraulic or pneumatic damping
Swivel Unit SES-6 - ❗️- with air- and signal-grommets
Pneumatic rotary actuator SES-6 👉 ...at booth B1-407 👈 ❗️ Full power in the end positions ❗️ 4 air ducts in the rotating turret ❗️ 4 signal ducts in the rotating turret ✅ Fixed, external stops via stop screws ✅ Repeatability +/- 0.01° ✅ Angle of rotation 0-190°, externally adjustable ✅ With shock absorber ❗️ Shock absorber failure detection possible ✅ Sensors for hollow stop screw ✅ Actual torque 6 Nm at 6 bar ✅ Jmax. 6,000 kgcm² ✅ Swivel times 0.35-2 s
modular system | column to fit in rotary indexer for simple assembly of other modules
✅ Hollow screw-in column ✅ For pneumatic rotary indexing tables ✅ For quick and easy installation of other automation modules ✅ Hollow, for media feedthrough for flange-mounted assemblies ✅ Movable, as it is attached to the rotary indexing table ✅ Secured in a fixed center hole using a fit and threaded ring ✅ Clamping block optional (accessory for Wagner grid spacing) ✅ Retrofittable (accessory) ✅ For pneumatic rotary indexing tables RSE-6 (ES-6) ✅ For pneumatic rotary indexing tables RSE-9 (ES-9) ❓ You may know our tables by a different label❓ ❗️We are manufacturers since 1979
Modular system -❗️- for easy automation
Example for needed motion sequence: ▶️ Lifting - Swiveling - Feeding - Gripping - Rotation on rotary indexing table Recommended modules; ✳️ Lifting unit HEK-4 ✳️ Swivel unit SE-4 with 4-way air grommets ✳️ Linear unit LSM-4 centrally mounted with ✳️ Adapter plate APL-4-N ✳️ Gripper PGM-38 ✅ Grid dimension with centering holes ✅ Centering rings (fit h6) ✅ Quick joining and assembly without drilling ✅ Adapter plates available as accessories